Want to go AG... - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Want to go AG...

Reply
 
Thread Tools
Old 12-16-2012, 04:02 AM   #1
GeorgiaTiger
 
GeorgiaTiger's Avatar
Recipes 
 
Nov 2012
Marietta, Ga
Posts: 413
Liked 73 Times on 43 Posts



Not sure how many of you guys read the Beginner forum, but I started in November with a Mr. Beer kit. Brewed the beer in that kit then went to a partial mash Samuel Smith's Oatmeal Stout. I brewed a Hefe last week with just an extract, but have been wanting to go AG. Just wondering exactly what I would need to do so. Im assuming I would need at least a propane burner (turkey fryer, probably, right?), Larger brew kettle and a mash tun of some sort. I have been looking at builds for mash tuns and most people are using the rubbermaid coolers (round ones) for a mash tun. What else, other than the equipment that I already have for brewing kits, would I need?

I have really fallen in love with the whole brewing process and the science of it. I think that AG would enhance that.

Any thoughts?
__________________
Allen
"Im an airlock sniffer...I sniff airlocks"
Primary 1: Empty
Primary 2 (LBK): Empty
On Deck - IPA of some sort
Bottled - Irish Red Ale
Wicked Gnome HomeBrewing

 
Reply With Quote
Old 12-16-2012, 04:25 AM   #2
GrogNerd
mean old man
HBT_SUPPORTER.png
 
GrogNerd's Avatar
Recipes 
 
Oct 2012
Sterling, VA
Posts: 6,236
Liked 2183 Times on 1371 Posts


propane burner + larger brew kettle are used for a larger boil. 8 gallon BK can do full boil for a 5 gallon batch. or you can do a partial boil; that same 8 gallon BK for a 10 gallon batch, topping off as needed into the fermenter.

without the separate mash tun, you can still do all extract in the larger BK; the kettle just has to do with the boil.

or full or partial mash BIAB (brew in a bag), which uses your BK as the mash tun. once you pull your grains, you're back to full or partial boil, depending on your volume into the fermenter

you can stop there and never have to deal with a separate mash tun.
__________________
"Beer. Good." - Words of House Grog

drinking: Otto M. Gourd Pumpkin Barleywine, Jewel Thieves Apple Wine, Fresh Squee Zed IPA - bottle conditioning: LoCo Foot Barleywine, Basque cider - lagering : Schwarzbier - fermenting: apple wine, Skeeter Pee - on deck: Grodziskie

 
Reply With Quote
Old 12-16-2012, 04:28 AM   #3
GeorgiaTiger
 
GeorgiaTiger's Avatar
Recipes 
 
Nov 2012
Marietta, Ga
Posts: 413
Liked 73 Times on 43 Posts


So would you recommend BIAB to start in AG? Especially since I dont have a mash tun ATM.
__________________
Allen
"Im an airlock sniffer...I sniff airlocks"
Primary 1: Empty
Primary 2 (LBK): Empty
On Deck - IPA of some sort
Bottled - Irish Red Ale
Wicked Gnome HomeBrewing

 
Reply With Quote
Old 12-16-2012, 05:27 AM   #4
dbsmith
Recipes 
 
Feb 2011
Seattle, Wa
Posts: 414
Liked 27 Times on 19 Posts


I began my all grain adventure doing BIAB with two relatively cheap bayou classic aluminum 5 gallon pots, which worked great. I could do two mashes if i wanted to do a really strong beer, or just use one pot to mash in and the other for sparging. When I felt like it was time to go beyond BIAB, I simply modified one of my 5 gallon pots to turn it into a nice mash tun. I bought the weldless brewmometer, a weldless spigot, a bazooka screen, and drilled a couple holes, and presto! I even slightly increased the size of the steam hole on the lid so that I can stick my long probed thermometer into the mash to get another temperature reading from a different spot. It's a pretty sweet mash tun. I then just bought a used 7.5 gallon pot to do my full boil in.

Just think about how you may want to upgrade your setup in the future and see if you can buy something that can be upgraded. Also, you don't necessarily need a turkey fryer. I still use my stove top and manage to get a full boil, it just takes a while to get it rolling.

 
Reply With Quote
Old 12-16-2012, 07:03 AM   #5
Frogmanx82
Recipes 
 
Nov 2012
Posts: 143
Liked 17 Times on 13 Posts


You can manage stovetop, but a decent 20 psi propane burner will shave hours off the brew process and is a must for 10 gallon batches. With the burner I would get a rubbermaid cooler and fit it with either a false bottom or some type of stainless mesh screen. What I like about mashing in a cooler is you load it up and forget about it for an hour which allows you lots of time to set up the brew equipment, heat some sparge water and enjoy some brews.

If you stay in 5 gallon batches, an 8 gallon BK is fine. You will need at least a 4 gallon pot to heat your sparge water. For me I add roughly 3.5 gallons heated water for the initial mash and again for the sparge on 10 pounds of grain to get 6.5 gallons of wort for the boil. On a stovetop you won't be able to get as strong a boil and will have less ability to reduce the wort volume. If you don't have one already, some sort of chiller is really a must if you do a full boil.

 
Reply With Quote
Old 12-16-2012, 08:08 AM   #6
aryoung1980
Recipes 
 
Sep 2011
Milwaukee, WI
Posts: 535
Liked 87 Times on 51 Posts


As far as your mash tun goes I converted a 48qt rectangular cooler. It was $20 from Wal-Mart. The drain plug was the same diameter as the ball valve I installed (another $20) so no drilling required. Lastly I bought a stainless steel mesh/boil screen ($15) instead of getting a manifold. I've never lost more than 2 degrees with my mash temps. I mash and bulk sparge out of the same cooler and consistently get 65-70% efficiency.

 
Reply With Quote
Old 12-16-2012, 10:45 AM   #7
RM-MN
HBT_SUPPORTER.png
Recipes 
 
Nov 2010
Solway, MN
Posts: 9,779
Liked 1759 Times on 1397 Posts


Do you want to go minimal just to see how the process works and then decide if you want to continue? Get a paint strainer bag and make a small batch in the pot you have (BIAB). That's all it takes. Really! I had a 5 gallon pot so I used this method and did a 2 1/2 gallon batch (half size batch). That worked well so I did another, then I bought a turkey fryer and started doing 5 gallon batches.

I don't have a LHBS so I bought a cheap Corona style grain mill and mill my own grains. I think that I have it paid for just in the savings from all grain as opposed to extract kits and it didn't take long.

 
Reply With Quote
Reply
Thread Tools



Forum Jump