Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Beverage factory
Reply
 
Thread Tools
Old 08-29-2007, 07:14 PM   #1
ArroganceFan
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2007
Location: Central Ohio
Posts: 524
Liked 1 Times on 1 Posts

Default Beverage factory

I would like to recommend to everyone here that they stay away from the beverage factory. Their customer service has been horrible, and the tech support just as bad.

They screwed up my initial order, and when I called them back the first time they said that I would have to pay to ship the parts back to them to get a refund for them. Does that make sense? I should have to pay for shipping because they screwed up. They also wanted me to pay for the parts they were supposed to send the first time up front before they would ship them to me. Let me add here that all 3 people who I talked to on the phone were very rude and had horrible attitudes, including the "supervisor." After talking to said supervisor for a while, I finally got her to ship out the replacement parts.

Flash forward to today, I get the correct parts in the mail this morning. Only took a week... So, I go to try to take the original fitting off of the regulator to put the Y fitting on it, and it will not budge. I call up their tech support, and the guy tells me to keep wrenching on it to get it off...to which I tell him that the fitting is in the regulator so tightly that the nut is stripping without loosing the fitting. He had no tips or suggestions, and told me to talk to customer support to get the right fitting out to me.....Needless to say, I am very angry at this point, and I am worried that I have ruined my fitting and wont be able to get it off of the regulator...

Do not buy from the beverage factory...


/rant off


__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin Historical Review of Pennsylvania, 1759

Primary: Fat Tire clone
Secondary: Summit IPA
On Tap: Edwort's Apfelwein
Up Next: Blue Moon clone, Muddy Waters Ale
Coming Soon: Geforce Shugga
ArroganceFan is offline
 
Reply With Quote
Old 08-29-2007, 07:21 PM   #2
ArroganceFan
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2007
Location: Central Ohio
Posts: 524
Liked 1 Times on 1 Posts

Default

Also, once I get this thing off, should I put pipe tape on the connections? Including Y to reg, and hose fitting to Y.

Thanks






+1 for post whore


__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin Historical Review of Pennsylvania, 1759

Primary: Fat Tire clone
Secondary: Summit IPA
On Tap: Edwort's Apfelwein
Up Next: Blue Moon clone, Muddy Waters Ale
Coming Soon: Geforce Shugga
ArroganceFan is offline
 
Reply With Quote
Old 08-29-2007, 07:21 PM   #3
krispy d
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2007
Location: Old Saybrook CT
Posts: 617
Liked 5 Times on 5 Posts

Default

Bummer about your trouble, FWIW I have had only good transactions with them. Again, YMMV. thanks for telling your story.
__________________
On Tap
CT Common Steam Beer
Guest Tap
Old Burnside Ten Penny Ale
Primary
Westbrook Porter
Secondary

Empty
Up Next
A big IPA ??


“Beer is proof that God loves us and wants us to be happy.”
-Benjamin Franklin
krispy d is offline
 
Reply With Quote
Old 08-29-2007, 07:24 PM   #4
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,754
Liked 1301 Times on 855 Posts
Likes Given: 35

Default

Are you sure bevfactory isn't a subdivision of StPats in Texas?
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Old 08-29-2007, 07:27 PM   #5
ArroganceFan
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2007
Location: Central Ohio
Posts: 524
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by Bobby_M
Are you sure bevfactory isn't a subdivision of StPats in Texas?
LOL I read your post about the right after I finished writing mine.
__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin Historical Review of Pennsylvania, 1759

Primary: Fat Tire clone
Secondary: Summit IPA
On Tap: Edwort's Apfelwein
Up Next: Blue Moon clone, Muddy Waters Ale
Coming Soon: Geforce Shugga
ArroganceFan is offline
 
Reply With Quote
Old 08-29-2007, 07:48 PM   #6
david_42
Feedback Score: 0 reviews
 
david_42's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Willamina & Oak Grove, Oregon, USA
Posts: 25,674
Liked 141 Times on 134 Posts

Default

I can only say my single experience with them was good. Not only was their list price for the parts better than anyone else, I got the sale price, even though the sale started after I ordered, but before they shipped.

I've also had problems getting the fittings on regulators apart, but I didn't purchase the regulators from BF. Seems to be a common problem, because I've never seen a regulator assembled with Teflon tape, just bare metal to metal.
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk
david_42 is offline
 
Reply With Quote
Old 08-29-2007, 07:49 PM   #7
ArroganceFan
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2007
Location: Central Ohio
Posts: 524
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by david_42
I can only say my single experience with them was good. I got the sale price, even though the sale started after I ordered, but before they shipped.

I've also had problems getting the fittings on regulators apart, but I didn't purchase the regulators from BF. Seems to be a common problem, because I've never seen a regulator assembled with Teflon tape, just bare metal to metal.
Would it be best to use the tape or just stick with the metal to metal?
__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin Historical Review of Pennsylvania, 1759

Primary: Fat Tire clone
Secondary: Summit IPA
On Tap: Edwort's Apfelwein
Up Next: Blue Moon clone, Muddy Waters Ale
Coming Soon: Geforce Shugga
ArroganceFan is offline
 
Reply With Quote
Old 08-29-2007, 08:42 PM   #8
Atl300zx
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2007
Location: Hoplanta, Georgia
Posts: 746
Liked 3 Times on 3 Posts

Default

When i placed my order with them, they left out some parts. They sent them 2 day, no questions asked, no additional cost. To me, they exceeded my expectations for customer service. Of course it would have been better to get everything i ordered the first time, but i have no complaints.
__________________
Jaded Spirits Brewery
Primary: Dennis Hoppier III
Secondary: Empty
Bottles: Triple Berry Apple Cider, Cote Apple Cider, Wild Blackberry Apple Cider, Dim Wit II, Mighty Porter
Kegs: 4Cs IPA - The Diamond Standard, Innis & Gunn Rum Cask Clone.
On Deck: The "Three Stouts", Wild Blackberry Mead, Irish Red

Jaded Spirits DIY Stirplate
Blog @ JadedSpirits.com
Blog @ HBT
Atl300zx is offline
 
Reply With Quote
Old 08-29-2007, 09:31 PM   #9
cpbergie
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2007
Location: San Diego
Posts: 213
Default

I also go to them, and have had no complaints. I even had a similar problem trying to get an old dial off a regulator, i took it in, and they took it off, and put the new gauge on for me.

Ive never ordered online though.
cpbergie is offline
 
Reply With Quote
Old 08-29-2007, 09:35 PM   #10
Brew-boy
Feedback Score: 0 reviews
 
Brew-boy's Avatar
Recipes 
 
Join Date: May 2006
Location: Lapeer, Michigan
Posts: 2,415
Liked 14 Times on 11 Posts
Likes Given: 9

Default

I also had very good luck with them when I bought shanks,tubing and etc.. But I never had to call customer service ether.


__________________
Next:Smoked Pilsner.
Primary:Belgian Red, American Stout w/Roeselare
On Tap:Pale Ale, English Bitter
Aging: Imperial Oatmeal Stout on Vanilla beans.

I rather owe you a dollar than cheat you out of it.."Dad"

http://lapeerareabrewers.com/

http://groups.yahoo.com/group/LapeerAreaBrewers/
Brew-boy is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
I Hate Beverage Factory the_merlin Equipment/Sanitation 11 07-07-2009 05:54 PM
Hauling Brew Factory EamusCatuli Beginners Beer Brewing Forum 4 05-20-2008 02:21 AM
Anyone use this kegerator kit from the beverage factory? stever Bottling/Kegging 5 04-18-2008 09:14 PM
i have found a 3 gallon keg factory here in taipei! Aussie drunk Bottling/Kegging 1 02-22-2007 03:17 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS