Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > DIY Projects > Chillers and Stir Plates > New stir plate
Reply
 
Thread Tools
Old 12-14-2012, 02:20 PM   #1
Bodesbrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: South Portland, ME
Posts: 43
Liked 1 Times on 1 Posts

Default New stir plate

So I have everything I need... box, fan, power switch, power supply

Click image for larger version

Name:	image-924150881.jpg
Views:	383
Size:	61.0 KB
ID:	88448

, and potentiometer. J have looked and so many diagrams and can't figure out how to wire this thing! I am a visual guy and need pictures. My fan has a red and white wire together going to a harness that has a red, yellow and 2 blacks. There is also a random yellow wire coming from the fan. Totally lost!!


Bodesbrew is offline
 
Reply With Quote
Old 12-14-2012, 10:09 PM   #2
AreaKode
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Kansas City, MO
Posts: 16
Likes Given: 4

Default

I don't have any pictures for you, but I can tell you what all the wires are for.

Ignore the single yellow cable. This is connected to a computer's motherboard so you can monitor how fast the fan is spinning. You won't need it.

The black and red wires are the ones you need to power the fan. Red is +12 volt, black is ground. You just need to wire these two wires to a 12 volt power adapter.


AreaKode is offline
 
Reply With Quote
Old 12-15-2012, 04:29 PM   #3
Bodesbrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: South Portland, ME
Posts: 43
Liked 1 Times on 1 Posts

Default

I found some pictures on the webs that helped a lot and got it working just fine. My only issue is that when I tried a 12v plug it didn't work. I ended up using an old cell phone charger that's 5.7v or close to it. Definitely under 6v. The fan is not spinning nearly as fast as I want it to. Should I just use a plug/charger that has more voltage?
Bodesbrew is offline
 
Reply With Quote
Old 12-17-2012, 08:07 PM   #4
Bodesbrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: South Portland, ME
Posts: 43
Liked 1 Times on 1 Posts

Default

Got a new fan and it cranks!! Now I just have get my magnets in the proper spots... Should one be + side down and the other - side down? Any advantage to using 4??
Bodesbrew is offline
 
Reply With Quote
Old 12-19-2012, 12:47 PM   #5
Bodesbrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: South Portland, ME
Posts: 43
Liked 1 Times on 1 Posts

Default

Nothing, huh? Are these stupid questions??
Bodesbrew is offline
 
Reply With Quote
Old 12-19-2012, 01:19 PM   #6
scottsr123
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Posts: 59
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by Bodesbrew
Got a new fan and it cranks!! Now I just have get my magnets in the proper spots... Should one be + side down and the other - side down? Any advantage to using 4??
No advantage that I can think of to using 4 magnets. I actually think it would cause you problems. Just make sure your magnets are oriented as you stated (one with + side up, other with - side up) and that the distance between your magnets, center-to-center, is about equal to the length of your stir bar. I positioned mine with double-sided tape until I got the position right, then glued them.
scottsr123 is offline
 
Reply With Quote
Old 12-19-2012, 04:47 PM   #7
Bodesbrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: South Portland, ME
Posts: 43
Liked 1 Times on 1 Posts

Default

Thank you!
Bodesbrew is offline
 
Reply With Quote
Old 12-19-2012, 05:00 PM   #8
stpug
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2012
Posts: 3,173
Liked 533 Times on 457 Posts
Likes Given: 318

Default

Having the magnets sit too close to the actual fan motor will significantly slow down the motor's rpm speeds. Folks will generally either used a piece of ferrous material to act as a kind of "magnetic shield" or will use some kind of spacer between the motor and magnets in order to get the magnets further away from the motor. I went with the latter option and ended up using an empty scotch tape spindle that gives about 3/4" spacing, but many folks use PVC fittings or pipe.

Magnets: Putting 4 magnets in a '+' formation would likely just cause problems, however doubling up the magnets across from each other will increase their magnetic pull and many people have actually had to do this to get the kind of magnetic strength they need. Yes, like scottsr123 said, make sure you have the magnets with opposite poles facing up across from each other. Most stirbars are magnetic with north on one end and south on the other so they'll need to attract to your fan-mounted magnets.
stpug is offline
 
Reply With Quote
Old 12-19-2012, 05:11 PM   #9
Bodesbrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: South Portland, ME
Posts: 43
Liked 1 Times on 1 Posts

Default

Seems as though my problem now is that it's spinning too fast... Even with my potentiometer turned down it just won't take... Grrrr!
Bodesbrew is offline
 
Reply With Quote
Old 12-19-2012, 10:26 PM   #10
aludwig
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2010
Location: Warrenton, Virginia
Posts: 80
Liked 5 Times on 5 Posts

Default

Did you try it with water? Mine threw the magnet even at the lowest setting, but once I filled the flask with water, it slowed way down.


aludwig is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dramatically improve your Stir Starter stir plate wildwest450 Chillers and Stir Plates 27 03-24-2012 12:05 AM
first time stir plate user, how aggressive should i stir? wncbrewer Fermentation & Yeast 3 01-14-2012 02:35 AM
Stir plate effectiveness concern-maybe too small of a stir bar? crlova2 Fermentation & Yeast 20 03-15-2011 06:06 PM
DIY Stir Plate, Stir Bar attracted to mounts littlejon326 Chillers and Stir Plates 5 03-13-2011 02:12 PM
Stir Plate w/ Stir Rod in Boil Kettle resslerk Chillers and Stir Plates 6 03-20-2010 07:10 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS