Chillzilla Efficiency Problems - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Chillzilla Efficiency Problems

Reply
 
Thread Tools
Old 08-28-2007, 01:08 AM   #1
DirtyMick
Recipes 
 
Oct 2006
Dallas, Texas
Posts: 16
Liked 1 Times on 1 Posts



I just bought a Chillzilla and used it last weekend. I live in Texas and it has been HOT , thus the coldest I could get the tap water was ~80 DegF. I wanted to get the inlet water cooler than that for maximum heat transfer, so I coiled about 10 ft of garden hose in a cooler filled with ice and water, doing this dropped the inlet water temp to ~50 DegF at wide open faucet. Using a gravity feed set up I opened the boil kettle valve and let the wort flow out full open. It took about 10 minuted to run 5 gallons of wort through it. The wort starting temp was 205 DegF and after Chillzilla was 100 DegF. I was not that impressed with the cooling efficiency. And want some thoughts on how I could get a cooler wort. Note ambient air temperature that day was ~100 DegF and 30% humidity.
I think in the future I will keep the water rate High and try and slow down the wort rate as it runs through the counter flow chiller. I have also thought about running the wort output hose through an ice bath before it goes to the carboy...
Other suggestions welcome.
Thanks in advance,
Mike


__________________
On Deck: Autumn Goat Weizenbock
Drinking: Biere de Mars
Drinking: Independence IPA
Drinking: Scottish Strong Ale
Drinking: Spiced Apple Cider

 
Reply With Quote
Old 08-28-2007, 01:25 AM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,150
Liked 1622 Times on 1050 Posts


Sorry man, I have to call bullship on your "prechiller" dropping your tap temp by 30F at full flow. You problem measured water coming out that had been sitting in that hose for a while. You'd have trouble doing that with 10' of COPPER in icewater, nevermind a garden hose. It's more likely that the chiller was seeing 79F water.

I do have an Idea for you though. Fill your cooler up with ice to the very top. Then top it off with water and add rock salt. Hook the drain of the cooler up to the input of the chiller and let it flow. Run your garden hose into the cooler to replenish the water draining out. You'll have near freezing water running in your chiller for at least as long as you have ice melting.


__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.


 
Reply With Quote
Old 08-28-2007, 01:40 AM   #3
DirtyMick
Recipes 
 
Oct 2006
Dallas, Texas
Posts: 16
Liked 1 Times on 1 Posts


Bobby,
When you called bull**** it got me thinking... I did measure the "prechiller" water only once and that was right after I turned it on, so the water temp I measured was the water that had had been static and cooled way down, not the true flowing water temp...
I like your idea and will give it some thought. Have you used such a set up???
Cheers,
Mike
__________________
On Deck: Autumn Goat Weizenbock
Drinking: Biere de Mars
Drinking: Independence IPA
Drinking: Scottish Strong Ale
Drinking: Spiced Apple Cider

 
Reply With Quote
Old 08-28-2007, 01:48 PM   #4
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,150
Liked 1622 Times on 1050 Posts


Yes, I have done the icewater gravity feed. It works. My tap water was 86F on my last batch. It uses a lot of ice unfortunately, but that's just what it takes during the summer. It's far better to brew twice as much in the winter and just drink all summer long.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 08-28-2007, 03:09 PM   #5
EdWort
HBT_LIFETIMESUPPORTER.png
 
EdWort's Avatar
Recipes 
 
Jul 2006
Bee Cave, Texas
Posts: 11,914
Liked 336 Times on 169 Posts


Quote:
Originally Posted by Bobby_M
It's far better to brew twice as much in the winter and just drink all summer long.
Ya got that right!


 
Reply With Quote
Old 08-28-2007, 07:17 PM   #6
Lil' Sparky
Cowboys EAC
HBT_LIFETIMESUPPORTER.png
 
Lil' Sparky's Avatar
Recipes 
 
Feb 2006
Honolulu, HI
Posts: 3,959
Liked 71 Times on 45 Posts


If you're using a chillzilla, why not stick the whole thing in an ice bath? It's all copper, so you'd be chilling the cooling water as it chills the wort. Might be worth a try.

FWIW, I use a post-chiller immersed in an ice bath after my CFC for similar reasons. I can get the wort down below 70', but I've got to restrict the flow to about 3-4 mins/gal.





 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Efficiency Problems uabericm All Grain & Partial Mash Brewing 8 07-31-2009 05:11 PM
consistency/efficiency problems mkultra69 General Techniques 4 07-29-2008 02:18 AM
Who uses a Chillzilla CFC? EdWort Equipment/Sanitation 1 06-06-2008 05:03 AM
Partial Mash/AG Efficiency Problems efreem01 All Grain & Partial Mash Brewing 5 10-04-2007 04:18 PM
Low efficiency problems. Big Al All Grain & Partial Mash Brewing 18 05-20-2007 01:58 PM


Forum Jump