Quality Sanke Coupler? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Quality Sanke Coupler?

Thread Tools
Old 12-08-2012, 11:18 PM   #1
Oct 2011
howell, mi
Posts: 202
Liked 13 Times on 10 Posts

It has been a long time since I've hooked up a sanke keg, and the coupler that came with my kegerator is a bit cheap and nasty now because i didn't take care of it properly.

Any recommendations for a good quality stainless Sanke coupler? Ideally one that is easy to clean and replace seals as necessary.

Reply With Quote
Old 12-09-2012, 03:12 PM   #2
Mar 2012
, MA
Posts: 2,801
Liked 306 Times on 258 Posts

I think they're pretty much all going to be the same in terms of ease of disassembly, seals, etc. I bought an all stainless model from Keg Connection for a decent price.

Make sure you clean it well every once in a while. I like to remove the beer nuts / MFL fittings and gaskets, put the coupler in the "open" position and put in a bowl of hot PBW solution for an hour or two, then rinse really well and put in a bowl of very hot water for another hour or two to make sure it's completely rinsed out. Then reassemble and make sure to hit the main gasket/seal with keg lube.

Should last a long damn time if you maintain it! I like to spray Star San through it and re-lube the main seal every time I tap a keg. I think lubing that seal will make it last a lot longer.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
sanke D coupler Wulfman For Sale 4 11-06-2012 07:44 PM
Need Sanke S or D coupler in CT or NYC brinkdadrink Equipment/Sanitation 0 10-26-2012 03:04 PM
Sanke Coupler kickrjason For Sale 9 05-29-2012 04:14 AM
US Sanke tap/keg coupler benbradford For Sale 3 01-25-2012 03:23 AM
Sanke Coupler TravelingBrewer22 For Sale 2 12-26-2011 05:30 PM

Forum Jump