New Electric System - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Electric Brewing > New Electric System

Thread Tools
Old 12-08-2012, 06:38 AM   #1
Feb 2009
Mobile, Al
Posts: 26

So after several years on propane I decided to go all electric.

I already purchased several pieces of the system and admittidly have a few questions.

Going to do a single element 4500w with a single pump. Switched PID, Element, and Pump outlet.

The real question I have is could I remove the guts from the spa panel and place them inside my enclosure. I am thinking this is no different then the other way it just removes a plug and makes for smaller footprint overall.

The second is would someone please look over my schematic and let me know if I am missing anything that might kill me.

Thanks for the help!
Click image for larger version

Name:	Schematic 1.jpg
Views:	241
Size:	37.8 KB
ID:	87481  

Reply With Quote
Old 12-08-2012, 08:19 AM   #2
Aug 2012
jacksonville, fl
Posts: 184
Liked 11 Times on 11 Posts

yes, if your encousure is big enought putting the spa panel inside would work just fine.

Reply With Quote
Old 12-08-2012, 01:21 PM   #3
ChuckO's Avatar
Oct 2008
Keyrock, WV
Posts: 1,024
Liked 148 Times on 106 Posts

The only concern that I have about putting the GFCI in the control panel is that you still have power present even after tripping the GFCI. It's probably not a big problem, but my preference is to have all power shut off to the control if there is a fault.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Clean Electric System Adeering Electric Brewing 12 06-28-2012 02:41 AM
Need input on my new electric 1.5 bbl system EarthBound Brew Stands 42 05-25-2012 12:38 AM
First brew on my electric system. mcgeebc Electric Brewing 4 01-10-2012 02:32 AM
My electric system ver 6 missing link Electric Brewing 3 09-09-2011 04:33 AM
New Electric BIAB system Navy_Brewer Electric Brewing 22 07-29-2011 08:49 PM

Forum Jump