Home Brew Forums > Home Brew Market > For Sale > For Sale - 1 BBL (32 gallon) tippy dump mash tun
Reply
 
Thread Tools
Old 12-08-2012, 02:26 AM   #1
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,827
iTrader: (4)
Liked 1340 Times on 878 Posts
Likes Given: 35

Default For Sale - 1 BBL (32 gallon) tippy dump mash tun

I started building this thing thinking I'd use it for some club projects or group brews with a couple other brewers but it's just sitting here taking up space.

Details:
1.5mm (16gauge) stainless, heavy duty
20" diameter, 24" tall
Welded handles
Tippy dump pivot bosses and tip-locks (with bolts).
16 gauge, full diameter false bottom with silicone edge gasket. Sits on a separate 2" grid stand.
Lid (kinda beat up but functional)
1" NPT silver soldered bottom drain near front edge.
1/2" NPT silver soldered thermometer port 10" up from the bottom on the front side.
3" dial thermometer.


The total volume is 32.5 gallons.
Practical grain bill limit is 75 pounds which would yield 25 finished gallons of 1.082 or 20 gallons of 1.102.

Shipping is going to be expensive due to the size and weight. I just quoted shipping to Chicago at $80 via UPS ground.

Pictures:





__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Old 12-08-2012, 02:37 AM   #2
evandena
Feedback Score: 1 reviews
Recipes 
 
Join Date: Dec 2011
Location: Madison, WI
Posts: 818
iTrader: (1)
Liked 19 Times on 19 Posts
Likes Given: 3

Default

And as a bonus, you even get to meet the infamous Bobby himself.


__________________
My YouTube Channel:
http://www.youtube.com/user/evandena/videos
evandena is offline
soccerRef Likes This 
Reply With Quote
Old 12-08-2012, 03:54 AM   #3
NewTexian
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Leander, TX, Texas
Posts: 129
iTrader: (0)
Liked 2 Times on 2 Posts
Likes Given: 71

Default

Wish I lived close enough to pick it up...
__________________
If God had intended us to drink beer, He would have given us stomachs. ~ David Daye

http://newtexianbrew.com - http://ronlennex.com - New Texian on Brewer's Friend New Texian on Pinterest
NewTexian is offline
 
Reply With Quote
Old 12-08-2012, 01:24 PM   #4
smokinghole
Senior Member
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
smokinghole's Avatar
Recipes 
 
Join Date: Nov 2009
Location: Lucid Dream Land
Posts: 2,917
iTrader: (0)
Liked 125 Times on 102 Posts
Likes Given: 12

Default

What's this based off? It seems to be the ideal dimensions for me to get a bigger kettle so I can brew large batches and fill my 16gal fermentors. I don't however have the need for a 75 lb capacity tun.
__________________
Going through life is hard.
Going through life stupid is harder.
smokinghole is offline
 
Reply With Quote
Old 12-08-2012, 07:26 PM   #5
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,827
iTrader: (4)
Liked 1340 Times on 878 Posts
Likes Given: 35

Default

I actually think it's a bit oversized for a 16 gallon batch no matter what vessel it's used for.
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Old 12-10-2012, 09:21 PM   #6
SLOBrewDude
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: SLO, California
Posts: 19
iTrader: (0)
Liked 1 Times on 1 Posts

Default

Where did you source that edge gasket for the false bottom? I've been looking for something similar. Good luck with the sale.
SLOBrewDude is offline
 
Reply With Quote
Old 12-10-2012, 09:44 PM   #7
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,827
iTrader: (4)
Liked 1340 Times on 878 Posts
Likes Given: 35

Default

This particular one was in the sample pile at the extruder where I get my silicone tubing, but I have used and recommend this stuff from Mcmaster Carr... Hold on to your wallet!!

http://www.mcmaster.com/#edge-seals/=kjb6cr

__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Old 12-11-2012, 03:05 PM   #8
ScubaSteve
Feedback Score: 0 reviews
 
ScubaSteve's Avatar
Recipes 
 
Join Date: May 2007
Location: New Bern, NC
Posts: 3,692
iTrader: (0)
Liked 75 Times on 52 Posts
Likes Given: 11

Default

Man...that's the bee's knees right there.
ScubaSteve is offline
 
Reply With Quote
Old 12-11-2012, 05:56 PM   #9
bkl63
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Pennsville, New Jersey
Posts: 223
iTrader: (0)
Liked 8 Times on 8 Posts
Likes Given: 21

Default

Looks awesome Bobby!
__________________
Always amazed at the helpfulness of those here at Home Brew Talk. Easily the best source for questions around making great beer!
Member of First State Brewers!
bkl63 is offline
 
Reply With Quote
Old 01-03-2013, 04:08 PM   #10
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,827
iTrader: (4)
Liked 1340 Times on 878 Posts
Likes Given: 35

Default

Just bumping this. I need to get it out of here. Accepting offers. Local pickup preferred but I will consider shipping. Zip codes for quotes.


__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tippy Dump for Blichmann mash tun JonW Brew Stands 21 03-04-2015 10:57 PM
5 Gallon Brew Rig - Now with DIY Tippy Dump! -TH- Brew Stands 26 12-09-2013 04:13 PM
Sanke Tippy Dump MLT lschiavo Brew Stands 79 06-29-2012 11:20 PM
designing my tippy dump Jim Karr Brew Stands 4 05-30-2008 02:26 PM
Tippy Dump? Yorg Equipment/Sanitation 1 03-07-2008 03:08 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS