Looking for good, reliable, not cheap refractometer - Home Brew Forums
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Looking for good, reliable, not cheap refractometer
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 12-07-2012, 06:10 PM   #1
ImperialStout
Recipes 
 
Apr 2011
Litchfield, Maine
Posts: 288
Liked 8 Times on 8 Posts



Anyone have experience with this refractometer? Made by Extech and sells for $109 shipped. I know refractometers are available from eBay and other web sites from $15 to $60 and they all seem to be about the same. From the posts here they all work but my concern is how well and for how long. My concern is getting a plastic tool that is poorly assembled with parts that don't quite fit together well.

Have worked as an auto mechanic and carpenter. Prefer tools made by Milwaukee, Mack Tools, DeWalt or Bosch. Would never buy a tool made by Craftsman, (except for their hand tools and bar clamps) Ryobe or anything from Harbor Freight. I know theses tools work and some people swear by them. For me, they just don't have the fit and finish I expect from a quality tool that make it a pleasure to use.

What has your experience been with the $20 variety refractometer? Beside that they work, are they mostly plastic that will break if dropped? What about accuracy time after time? Some reviews say a reading has to be taken at least 3 times, all being different, and then averaged. The Extech user reviews say accuracy is dead on the first time and every time. The Extech web site says their RF-15 ATC refractometer is tested by dropping it from 3 feet and tested to see if the calibration has changed.


http://www.amazon.com/Extech-RF15-32...ref=pd_sbs_k_8


__________________
"Ask not what your country can brew for you ; ask what you can brew for your country."

"ich braute dieses Bier mit meinem Hund" (Life is indeed short: Get a Beagle and a Beer

 
Reply With Quote
Old 12-07-2012, 08:41 PM   #2
BigB
Recipes 
 
Dec 2009
Shelby Twp, MI
Posts: 1,755
Liked 44 Times on 38 Posts


Quote:
Originally Posted by ImperialStout View Post
Have worked as an auto mechanic and carpenter. Prefer tools made by Milwaukee, Mack Tools, DeWalt or Bosch. Would never buy a tool made by Craftsman, (except for their hand tools and bar clamps) Ryobe or anything from Harbor Freight. I know theses tools work and some people swear by them. For me, they just don't have the fit and finish I expect from a quality tool that make it a pleasure to use.
I know, I'm off topic here, but you should know that most of Craftsman tools are manufactured by Stanley Black & Decker Co... who also manufactures DeWalt, Mac, and Porter Cable... but I get what you mean, Craftsman power tools (non industrial series) is just the low-quality line of products for Stanley.

Ok, now back on topic, I don't own a low cost refractometer - mine is mid quality. I don't have any real complaints. It appears to be built well enough and doesn't require recalibration too often. I'm at work so not sure of the manufacturer... bought the $59 one from MoreBeer.


__________________
I love the sound of an airlock bubbling in the morning. It sounds like.....VICTORY.

Quote:
Originally Posted by TxBrew
It's now degenerating into nu uh and uh huhs and it no longer serves a point.

 
Reply With Quote
Old 12-08-2012, 12:57 AM   #3
ImperialStout
Recipes 
 
Apr 2011
Litchfield, Maine
Posts: 288
Liked 8 Times on 8 Posts


Thanks,

Went with the Vee Gee Scientific BTX-1 Handheld Refractometer, with Brix Scale, 0-32%, +/-0.2% Accuracy, 0.2% Resolution, 10 to 30 degree C ATC for $93.84, shipped. A little on the pricey side but then I know what I am getting.
__________________
"Ask not what your country can brew for you ; ask what you can brew for your country."

"ich braute dieses Bier mit meinem Hund" (Life is indeed short: Get a Beagle and a Beer

 
Reply With Quote
Old 12-08-2012, 03:44 AM   #4
milesvdustin
Recipes 
 
Feb 2010
Pensacola, Florida
Posts: 627
Liked 12 Times on 12 Posts


Off topic: harbor freight sells a lot of good stuff. Just have to selectively shop. The earthquake impacts are awesome, among other things. They do sell a decent amount of USA made items.
__________________
Quote:
Originally Posted by djsethall View Post
It's like a big hot douche for my brewery.

 
Reply With Quote
Old 12-09-2012, 01:21 AM   #5
archer75
Recipes 
 
Sep 2007
Gresham, Oregon
Posts: 133
Liked 1 Times on 1 Posts


I use the cheap $20 amazon one. Works fine. And dead on accurate when compated to my hydrometer. Just because something is expensive doesn't always mean it's better. Hasn't let me down yet!

 
Reply With Quote
Old 12-10-2012, 02:26 PM   #6
Chardowner
Recipes 
 
Dec 2012
Posts: 3

The $59 MoreBeer dual scale (Brix & Wort SG) is the same as the RSG-100ATC found at www.RSG-100ATC.com for $23.00. Save $36 plus S&H...

 
Reply With Quote
Old 12-10-2012, 03:52 PM   #7
BigB
Recipes 
 
Dec 2009
Shelby Twp, MI
Posts: 1,755
Liked 44 Times on 38 Posts


Quote:
Originally Posted by Chardowner View Post
The $59 MoreBeer dual scale (Brix & Wort SG) is the same as the RSG-100ATC found at www.RSG-100ATC.com for $23.00. Save $36 plus S&H...
HAHAHA! That explains it! I bought mine when it was on sale for like $20 off! I got roped into the whole "huge markdown" marketing scheme! Now I didn't overpay too much especially since I got free shipping, but it explains how they could mark it down so low. At first I assumed it was a loss leader item... but no!
__________________
I love the sound of an airlock bubbling in the morning. It sounds like.....VICTORY.

Quote:
Originally Posted by TxBrew
It's now degenerating into nu uh and uh huhs and it no longer serves a point.

 
Reply With Quote
Old 12-10-2012, 04:38 PM   #8
Johnnyhitch1
Recipes 
 
Dec 2011
SiX-ThReE-OnE, NY
Posts: 2,126
Liked 244 Times on 205 Posts


BOught mine of amazon couple months ago for somewhere around $45 it has ATC (temp correction) with an adjustment screw (in over 20 batchs testing mash runoff, preboil gravity and post gravity boil being accurate within .001 against a hydrometer) i havent had a single problem let alone have to use the adjustment screw. The body of mine is made of metal and houses a glass lens that is the medium with a plastic hinge laying over it. No complaints at all!

This was is comes with the adjustment screwdriver and cleaning cloth and a protective case. There are cheaper ones on amazon that look the same but do not come with the padded case which in my case was a huge plus for storage and long term use.

EDIT: after looking at your link i believe that its the same exact one...same grips and all with the ATC. Make sure you aint getting ripped!
__________________
^~~ "Like" it, Ill Give you beer ~~^
(({Brewing for the Movement Within}))

Primary:DUST
Kegged:AIR
BOTTLES:

Beer: NZ Brett (BD:9/16/12)
Mead: Blueberry-lemon, Raspberry-Lime, Habenero, POM, Traditional.

 
Reply With Quote
Old 12-11-2012, 01:12 AM   #9
Jakeintoledo
HBT_SUPPORTER.png
 
Jakeintoledo's Avatar
Recipes 
 
Jun 2012
toledo, oh
Posts: 263
Liked 24 Times on 17 Posts


yeh, my $60-ish refractometer from the boys at Midwest Supplies has served me quite well.
__________________
Jake in Toledo
_______________________________________

Primary: Privateer English Pale Ale
Kegged: VEE HAFF VAYS AUF MAKING YOU TALK LOUDLY Dunkel
Bottled: Pacific Pride (American) Pale Ale

 
Reply With Quote
Old 12-11-2012, 01:21 AM   #10
Golddiggie
HBT_SUPPORTER.png
 
Golddiggie's Avatar
Recipes 
 
Dec 2010
Posts: 11,943
Liked 491 Times on 427 Posts


Quote:
Originally Posted by ImperialStout View Post
Thanks,

Went with the Vee Gee Scientific BTX-1 Handheld Refractometer, with Brix Scale, 0-32%, +/-0.2% Accuracy, 0.2% Resolution, 10 to 30 degree C ATC for $93.84, shipped. A little on the pricey side but then I know what I am getting.
I've been using that one, plus the BTX-20 with great results. IME, both are SOLID refractometers that will serve you well.


__________________
Hopping Tango Brewery

跟猴子比丟屎 ・ Gun HOE-tze bee DIO-se

On Tap: Caramel Ale, Mocha Porter II, MO SMaSH IPA
Waiting/Carbonating: 12.5% Wee Honey II, 8.9% Old Ale, English Brown Ale, Lickah ESB, Mocha Porter II
Fermenting
K1:
K2: Epic mead
K3: TripSix
On Deck: Caramel Ale
Aging:mead
Mead [bottled]:Oaked Wildflower Traditional, Mocha Madness, Blackberry Melomel, maple wine

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
International Shipping - Reliable Online retailer with good range radial67 General Beer Discussion 2 01-16-2013 07:40 AM
Looking for good/cheap Refractometer... any suggestions? Matteo57 Beginners Beer Brewing Forum 9 12-29-2011 03:06 PM
Cheap Homebrew supply shop/ reliable too KuntzBrewing General Beer Discussion 16 10-08-2011 09:37 PM
Cheap refractometer Belmont Equipment/Sanitation 8 06-19-2010 08:09 PM
Thriftshop score - Westover rhb-32 refractometer... cheap! TXCrash Equipment/Sanitation 8 12-20-2008 05:08 AM


Forum Jump