Monster mill mm3 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Monster mill mm3

Thread Tools
Old 12-05-2012, 05:44 PM   #1
Malichaidog's Avatar
Aug 2011
Kingman, Az
Posts: 84
Liked 1 Times on 1 Posts

I just got one, mounted it, assembled the hopper, no issues, looks great. I am a little thick, and I don't get which bolts are the set screws and which ones are the adjustment knobs. There are wing nuts on the side and then knobs on opposite ends of the mill. Can anyone tell me what is what? I have read all the instruction on how to set the gap, and it all makes sense I just don't know what is what when it comes to knobs

Reply With Quote
Old 12-05-2012, 09:32 PM   #2
Nov 2011
, NE
Posts: 425
Liked 36 Times on 26 Posts

Losen the wingnuts, adjust the knobs, tighten the wingnuts.

Reply With Quote
Old 12-06-2012, 06:47 AM   #3
mikescooling's Avatar
Jan 2012
Chicago, IL
Posts: 2,013
Liked 270 Times on 204 Posts

Those round knobs are the adjustment, they work together to set the mill gap. The owner of MM gives a great break down of adjustment on a thread, but I can't find it. One controls each side of the roller. If it's binding, it's wrong. One great way to do it is have the mill on and running then adjust the knobs so the grind is where you like it, then mark it with a pen. A 1/4 turn on the knob is a big difference

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
monster mill vs crankenstein vs rebel mill krenshaw Equipment/Sanitation 31 01-04-2014 10:48 PM
Monster Mill MM2 or MM2-2.0? mplutodh1 Equipment/Sanitation 4 12-29-2009 03:51 AM
Monster Mill Grain Mill Stand Build Shay Equipment/Sanitation 12 12-24-2009 08:35 PM
Got my monster mill ILOVEBEER All Grain & Partial Mash Brewing 4 12-22-2009 04:07 PM
Monster mill Action Equipment/Sanitation 12 04-23-2008 12:05 AM

Forum Jump