Mash pH - whats the big deal ? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Brew Science > Mash pH - whats the big deal ?

Reply
 
Thread Tools
Old 12-04-2012, 07:40 AM   #1
craigevo
Recipes 
 
Sep 2010
Singapore
Posts: 50
Liked 2 Times on 2 Posts



After reading up on as much as I can find on the topic of brewing related ph I have ended up wondering if the benefit of hitting specific mash ph's isn't really just about getting a good efficiency.

I don't really care about efficiency at the homebrew scale since it only costs a dollar or two more to buy more grain if necessary. So, assuming I can manipulate many of the other variables such as attenuation/dextrin content with mash temperature, and being able to acidify sparge water and/or kettle wort using acid, what are the benefits of mashing at ph 5.2 versus 5.8. I really cant think of anything right now ?

Lets also take consistency out of the equation and say, for the sake of argument, that I start with RO water and add measured salts to get somewhere in the range I mention above, and lets just say I make the same water every time I brew a particular beer.

lots of assumptions I know, and I dont intend to actually take this approach, I just want to try and learn if there's some extra benefit I haven't taken into account with specific regard to mash ph alone. I have read many articles which list together the benefits of achieving 'optimum' mash/kettle/ferment/product stability ph. but not many just on mash ph alone.

 
Reply With Quote
Old 12-04-2012, 01:41 PM   #2
ajdelange
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Aug 2010
McLean/Ogden, Virginia/Quebec
Posts: 9,294
Liked 1493 Times on 1140 Posts


Mash efficiency is the least of your concerns. If you have seen any of the hundreds of posts on this subject here you will have observed that flavor is what is of interest. If you were to brew 2 otherwise identical beers with one at mash pH 5.8 and one at 5.4 you would answer your question as soon as you tasted the beers. All the flavors are 'brighter' at 5.4.

phuff7129 Likes This 
Reply With Quote
Old 12-04-2012, 01:46 PM   #3
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,756
Liked 8025 Times on 5608 Posts


Quote:
Originally Posted by craigevo View Post
what are the benefits of mashing at ph 5.2 versus 5.8. I really cant think of anything right now ?
Flavor.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 12-04-2012, 11:39 PM   #4
phuff7129
Recipes 
 
Nov 2011
Lino Lakes, MN
Posts: 558
Liked 40 Times on 34 Posts


Quote:
Originally Posted by ajdelange View Post
Mash efficiency is the least of your concerns. If you have seen any of the hundreds of posts on this subject here you will have observed that flavor is what is of interest. If you were to brew 2 otherwise identical beers with one at mash pH 5.8 and one at 5.4 you would answer your question as soon as you tasted the beers. All the flavors are 'brighter'.
Are the flavors brighter at 5.4 or 5.8?
__________________
This might be the beer talking....but I really love beer!

 
Reply With Quote
Old 12-04-2012, 11:50 PM   #5
ajdelange
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Aug 2010
McLean/Ogden, Virginia/Quebec
Posts: 9,294
Liked 1493 Times on 1140 Posts


5.4

 
Reply With Quote
Old 12-05-2012, 02:25 AM   #6
mabrungard
HBT_LIFETIMESUPPORTER.png
 
mabrungard's Avatar
Recipes 
 
Feb 2011
Carmel, IN
Posts: 4,248
Liked 652 Times on 505 Posts


I disagree that mash pH has much to do with efficiency. Mash pH has much more to do with conversion and fermentability. Efficiency is far more effected by the grind and the run off rate and procedures.
__________________
Martin B
Carmel, IN
BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://sites.google.com/site/brunwater/

Like Bru'n Water on Facebook for occasional discussions on brewing water and Bru'n Water
https://www.facebook.com/pages/Brun-...?ref=bookmarks

 
Reply With Quote
Old 12-05-2012, 03:27 AM   #7
highgravitybacon
Recipes 
 
Sep 2012
Posts: 924
Liked 216 Times on 152 Posts


https://www.youtube.com/watch?v=zJj_...e_gdata_player

John Palmer speaketh all ye seek.

 
Reply With Quote
Old 12-05-2012, 05:35 AM   #8
craigevo
Recipes 
 
Sep 2010
Singapore
Posts: 50
Liked 2 Times on 2 Posts


AJ - this brightness you talk of, is it due to the mash ph, or perhaps due to the derived kettle/fermenter ph ? I guess i didn't design my question very well.

If I do two batches of the same grain bill.
1. mash at 5.8 and acidify the pre boil kettle wort to ph5.3
2. mash at 5.4 and acidify the pre boil kettle wort to ph5.3

I know everyone will now tell me that the differences in ph will result in a different wort fermentability and dextrin content, so I will run the two mashes at different temperatures to each other to compensate for the differing ph and result in the same fermentabilty and dextrin content (calculated using my time machine)

 
Reply With Quote
Old 12-05-2012, 07:40 AM   #9
ajdelange
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Aug 2010
McLean/Ogden, Virginia/Quebec
Posts: 9,294
Liked 1493 Times on 1140 Posts


Brewing of beer involves hundreds or perhaps even thousands of biochemical reactions most of which are catalyzed by enzymes. An enzyme works best is a given temperature and pH range. There are lots or reactions going on in the mash tun beyond just those of the amylases. As even the two amylases have different optimum pH's it is probably clear that there is no optimum pH at which all the enzymes in play will work at their best. So we rely on empirical determination of what is a good pH at which to operate the mash tun. That seems to be about 5.4. Go higher and beer flavors become dull (and you probably get less conversion as well). Go lower and they say the beer tastes thin. So you must, for best flavor, get the mash pH into the right range. There are reasons for wanting the pH out of the kettle to be 5 - 5.3 and so some brewers monitor that and make adjustments with additional acid or salt to get into that range if the runoff isn't in that range automatically. Get the mash pH right and the kettle pH tends to be right too as does the fermenter pH and final beer pH. So mash pH is the pH we focus on.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Whats the deal with this? Hesh General Beer Discussion 3 11-07-2012 09:52 AM
So whats the deal with my pilsner gstrawn Recipes/Ingredients 11 08-23-2011 07:51 PM
Whats the deal with my pid?? kickflip_mj Brew Stands 21 07-12-2008 05:05 AM
whats the deal with growlers? hardrain Beginners Beer Brewing Forum 11 05-07-2008 10:44 AM
Whats the big deal with mash efficiency? Sherpa FE All Grain & Partial Mash Brewing 14 11-25-2007 02:28 AM


Forum Jump