Distilling Questions - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Distilling Questions

Closed Thread
 
Thread Tools
Old 12-04-2012, 02:29 AM   #1
akthor
HBT_SUPPORTER.png
Recipes 
 
May 2010
Litchfield and Brownton, MN
Posts: 1,733
Liked 66 Times on 58 Posts



Been studying up on distilling and it seems that since I have a 50' 1/2" SS coil installed in my HLT if I had and airtight cover for my boiling keggle I could fill the HLT with ice and water like I do to cool my wort and use the coil as the cooling coil in the installed coil in the distilling process?

My next question is do I need a copper or SS line going from the boil keggle lid to the SS coil or can I use the silicon hose I use for brewing? If I could I could just use the same quick disconnects and put a quick disconnect male fitting onto the airtight lid I fashion.


__________________
LAKE MARION SOCIAL CLUB

 
Closed Thread
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Distilling chip82 General Beer Discussion 1 02-21-2011 08:29 PM
distilling question flyboy General Beer Discussion 15 04-22-2009 08:50 PM


Forum Jump