Just brewed my first non Mr. Beer batch.... Yesterday - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Just brewed my first non Mr. Beer batch.... Yesterday

Reply
 
Thread Tools
Old 12-03-2012, 08:41 PM   #1
Rys06Tbss
Recipes 
 
Apr 2011
Yorkville, Illinois
Posts: 380
Liked 18 Times on 13 Posts



Ive been really busy so I didnt get a chance to make this thread till now. I ordered a deluxe brewing kit from Northern and then found out there is Local brew store semi close to my house. I canceled my order and drove out there so I could pick up a kit. I ended up getting a True Gold Brew kit with a 6 gallon plastic carboy and a 5 gallon glass carboy. I picked up a BB American Pale Ale extract kit and decided to get to it when I got home. The last time I attempted to brew anything was with Mr. Beer kit that I got a few years ago... My mom was kind enough to get me that instead of a Monster Brew kit that I really wanted. Had I received the Monster Brew I have a feeling I would be been bit by the hop bug alot sooner. The Mr. Beer brew turned out terrible. I drank about 5 bottles then dumped the rest. For some reason I had the itch to brew once again so I decided to make the jump. Back to yesterday... Everything went good. Took about 3 hours to sanitize and brew my first batch... Its sitting in my fermentor right now. I was a little suprised that this am when I checked it, there was little to no bubbles. I thought the Mr beer was foamy right away. I checked it about 30 min and there are three groups of small bubbles sitting on top of my wort and the air lock it twitching so Im sure something is going on. Anyhow that is all I have for now. Im debating buying another carboy and starting another batch already though.

 
Reply With Quote
Old 12-03-2012, 08:50 PM   #2
Ostomo517
Registered User
Recipes 
 
Nov 2012
Norton Shores, Michigan
Posts: 1,585
Liked 597 Times on 381 Posts


It definately gets addicting that way, ive got about two cases of pints working on carbination now, a batch in primary bubbling away and wondering if I should sneak away to the LHBS while the wife naps so I can get another recipe started!

 
Reply With Quote
Old 12-03-2012, 08:59 PM   #3
rodwha
Recipes 
 
Sep 2011
Lakeway, Texas
Posts: 4,474
Liked 179 Times on 168 Posts


It is addicting! I've bought several buckets, and got several more from the local grocery store. I have too many now, but that's OK. Eventually I'll get into mead too and aging barleywine.

I get $70/month for supplies, but often come closer to $100. And once I've ordered my stuff I'm back to looking for new recipes and filling my cart back up!

MoreBeer certainly likes me!

Oh, and I love checking on my beers and smelling the airlocks! Mmmm!
__________________
Quote:
Originally Posted by Revvy View Post
...tasting a beer at 1 week, and again at 2....that to me just means there 2 less beers that are actually tasting good and are ready at the end.
"Anyway on the wall was this sign. People who drink light beer don't really like beer. They just like to piss a lot."

"Were I to leave where else would I go? Your words of life and of truth You hold." - Third Day

 
Reply With Quote
Old 12-03-2012, 09:59 PM   #4
RM-MN
HBT_SUPPORTER.png
Recipes 
 
Nov 2010
Solway, MN
Posts: 9,405
Liked 1631 Times on 1296 Posts


If you keep the fermenter cool (low to mid 60's) the ferment will go slow. No blow offs, no fusel alcohols, no nasty off flavors. It's the single change that got me brewing better beers.

The plastic carboys are much safer than the glass as when you drop them they will bounce or maybe dent or crack but no razor sharp glass fragments scattered about. If you can forgo looking at the beer as it is fermenting (voyeur, those yeasts are reproducing in there) the plastic buckets are nice to work with. Cheap, wide opening to pour the wort into, easy to reach in to clean, and they come with handles for moving them around. The downsides are the may not seal the lid so you can't watch the airlock bubble and they are more easily scratched than glass.

Erich8 Likes This 
Reply With Quote
Old 12-03-2012, 11:15 PM   #5
Erich8
Recipes 
 
Nov 2012
Posts: 51
Liked 2 Times on 1 Posts


Quote:
Originally Posted by RM-MN View Post
If you keep the fermenter cool (low to mid 60's) the ferment will go slow. No blow offs, no fusel alcohols, no nasty off flavors. It's the single change that got me brewing better beers.

The plastic carboys are much safer than the glass as when you drop them they will bounce or maybe dent or crack but no razor sharp glass fragments scattered about. If you can forgo looking at the beer as it is fermenting (voyeur, those yeasts are reproducing in there) the plastic buckets are nice to work with. Cheap, wide opening to pour the wort into, easy to reach in to clean, and they come with handles for moving them around. The downsides are the may not seal the lid so you can't watch the airlock bubble and they are more easily scratched than glass.
I love watching those yeasties.... ANYWAYS. I am about to pick up a deep freeze and a temperature controller to regulate my fermentation. Been having a lot of blow off issues so hopefully that takes care of it. And just to think... 2 months ago I had never even thought of brewing.. welcome back to the addiction!

 
Reply With Quote
Old 12-03-2012, 11:35 PM   #6
SavoryChef
Recipes 
 
Feb 2012
Sparks, NV
Posts: 1,013
Liked 147 Times on 97 Posts


Welcome Virgin!! It only gets better from here.

 
Reply With Quote
Old 12-03-2012, 11:43 PM   #7
Rys06Tbss
Recipes 
 
Apr 2011
Yorkville, Illinois
Posts: 380
Liked 18 Times on 13 Posts


The only thing thats keeping me from getting another batch of beer going is my lack of bottles. I currently have about 50. 6 are still full with SNPA and NB Belgo. I should have those finished by the end of the evening with any luck. I might have some access to some Grolsh Bottles too. That will help matters. Or I guess I could stop being cheap and buy some bottles. I do think I want to try some small batches (1 gal or 2.5 gal) So you guys wash bottles in the dishwasher for sanitizing? Or should I scrub each bottle.

 
Reply With Quote
Old 12-03-2012, 11:57 PM   #8
SavoryChef
Recipes 
 
Feb 2012
Sparks, NV
Posts: 1,013
Liked 147 Times on 97 Posts


If I bottle, I soak with oxy clean overnight, rinse then sanitize with star san.

 
Reply With Quote
Old 12-04-2012, 12:05 AM   #9
Rys06Tbss
Recipes 
 
Apr 2011
Yorkville, Illinois
Posts: 380
Liked 18 Times on 13 Posts


Ok cool. I still have labels on all these bottles. They are soaking in C Brite right now. I have a quick question about OG. I used the hydrometer that came with the kit. I belive my OG reading was 1.020 @70f. Which according to the table that came with the hydrometer means its at 1.021? According to the instrutions sheet, It should be 1.051 to 1.055. Is this anything that I should be concern about?

 
Reply With Quote
Old 12-04-2012, 12:44 AM   #10
bobot
Recipes 
 
Oct 2012
Chicago Suburbs
Posts: 181
Liked 22 Times on 16 Posts


2 weeks ago I got a low og reading because I did not mix the "top off" water into the wort very well. If you are using extract kits, and you followed the directions, you can trust the og that your kit advertises.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brewed a 10gal batch yesterday... sKafifer Home Brewing Photo Forum 1 12-31-2011 08:01 PM
Brewed My First Batch Yesterday... fightingillini Beginners Beer Brewing Forum 27 06-09-2010 10:40 PM
Just brewed my first batch yesterday. nunnster Beginners Beer Brewing Forum 11 07-04-2009 02:57 AM
Brewed first batch up yesterday!!!!! Nexus555 Beginners Beer Brewing Forum 5 03-11-2007 10:22 PM
Brewed my fourth AG batch yesterday cweston All Grain & Partial Mash Brewing 1 07-10-2006 12:20 AM


Forum Jump