my stout lacks body, can i fix it in secondary? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > General Beer Discussion > my stout lacks body, can i fix it in secondary?

Reply
 
Thread Tools
Old 12-01-2012, 05:11 PM   #1
Jnco_hippie
Recipes 
 
Nov 2012
Amarillo, Texas
Posts: 109
Liked 12 Times on 9 Posts



I have already finished primary on my stout about a week ago. It has been sitting secondary since then. I must also admit I added nearly a gallon too much water when going in primary. I was using an odd carboy that I later discoverd was 6 gallon. Beginner mistake, I know.

The taste is good on sample, but feels thin. Is there anything I can do at this point?

What about removing a few pints of it, souring it, pasteurizing it, then adding back into secondary?

I'm up for any suggtions that may help. Would do anything to try and save this one!



 
Reply With Quote
Old 12-01-2012, 05:47 PM   #2
shanez28
Recipes 
 
Sep 2012
Las Vegas, NV
Posts: 14
Liked 1 Times on 1 Posts


Disclaimer: I really know nothing about brewing.

This is a great question that I'd like to know the answer to as well.

I'm wondering if you were to boil and chill some maltodextrin and ad it while racking to the secondary would be of any help.



 
Reply With Quote
Old 12-01-2012, 06:19 PM   #3
FATC1TY
Recipes 
 
May 2012
Atlanta Area, GA
Posts: 1,615
Liked 140 Times on 114 Posts


What is the gravity of the beer right now?

Was this an extract brew, or AG?

I'd personally avoid maltodextrin, but you could boil some water, add it, cool it and add it to secondary and see what you think.

If it's a big stout, and it's not too sweet, which would make it thinner and drier, you could try adding some lactose to it. Boil some water, add lactose, cool and add to the beer. It'll add some body and mouthfeel to the beer, and 1 # of it won't overly sweeten the beer too much.

The souring it and adding it back sounds terrible, IMO.
__________________
----------
Bubba's Backyard Brewery

 
Reply With Quote
Old 12-01-2012, 07:35 PM   #4
Jnco_hippie
Recipes 
 
Nov 2012
Amarillo, Texas
Posts: 109
Liked 12 Times on 9 Posts


It Was an extract kit from AHS. the " budget stout" for $22.99 last time I made this one it was fine, I think my extra gallon of water is the problem.

It is already in the secondary, has been for a week.

Any further suggestions, or anyone want to give a second on the maltodextren idea?

 
Reply With Quote
Old 12-02-2012, 07:35 PM   #5
FATC1TY
Recipes 
 
May 2012
Atlanta Area, GA
Posts: 1,615
Liked 140 Times on 114 Posts


Quote:
Originally Posted by Jnco_hippie View Post
It Was an extract kit from AHS. the " budget stout" for $22.99 last time I made this one it was fine, I think my extra gallon of water is the problem.

It is already in the secondary, has been for a week.

Any further suggestions, or anyone want to give a second on the maltodextren idea?
Whats the gravity?

If it's not too high, add some lactose. It'll sweeten a bit, but will deliver some body.

Otherwise try maltodextrin.. Some people can taste it, so go light at first.
__________________
----------
Bubba's Backyard Brewery

 
Reply With Quote
Old 12-02-2012, 07:58 PM   #6
homebrewdad
HBT_SUPPORTER.png
 
homebrewdad's Avatar
Recipes 
 
Jan 2012
Birmingham, AL
Posts: 3,270
Liked 384 Times on 279 Posts


OP, sounds like yes, you made a mistake... but trying to diagnose and fix the mistake now is probably only going to lead to more mistakes.

Uncarbonated beer in a carboy often tastes thin; carbonation is a huge part of mouthfeel.

If you ask me, you'll do better by leaving this beer alone and fixing your overfill mistake in the next batch. Otherwise, you are very likely to add new mistakes and be unable to figure out exactly what went wrong.
__________________
Check out the priming sugar calculator, yeast starter calculator, and the beer calorie calculator.

 
Reply With Quote
Old 12-03-2012, 03:06 AM   #7
Fantastical
Recipes 
 
Sep 2010
Kelowna, B.C.
Posts: 277
Liked 4 Times on 4 Posts


Quote:
Originally Posted by homebrewdad View Post
If you ask me, you'll do better by leaving this beer alone and fixing your overfill mistake in the next batch. Otherwise, you are very likely to add new mistakes and be unable to figure out exactly what went wrong.
Agreed.

This batch is done. The best thing to do is let it finish it's course, keg or bottle it, and then enjoy it for what it is.

You now know how to improve the next batch!



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help . Wine lacks body mrbeachroach Winemaking Forum 12 12-13-2012 12:47 AM
My beer lacks in body usmc-ferg General Beer Discussion 5 07-20-2012 12:27 PM
My Belgian Wit (In primary) lacks BODY... please help! RickyLopez General Beer Discussion 11 04-21-2012 12:57 AM
Root Beer lacks body, any tips? Kershner_Ale Soda Making 4 11-06-2010 01:09 AM
Beer lacks body gregblatz All Grain & Partial Mash Brewing 11 04-14-2008 01:49 PM


Forum Jump