Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Sanke couple on corny setup
Reply
 
Thread Tools
Old 12-01-2012, 04:07 AM   #1
Antler
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Carbonear, Nl
Posts: 711
Liked 19 Times on 17 Posts

Default Sanke couple on corny setup

I have a setup for a keezer to tap 3 corny kegs, but would like to have a commercial beer once in a while. I saw the conversion kits for sanke to corny kegs, but do anyone sell the kit for some already using corny kegs to go to sanke?


Antler is offline
 
Reply With Quote
Old 12-01-2012, 04:14 AM   #2
Golddiggie
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
Golddiggie's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Between here and there, and everywhere
Posts: 12,063
Liked 483 Times on 423 Posts
Likes Given: 266

Default

You need to have the sanke coupler, then install the mfl fittings (instead of the barbed fittings normally on the coupler) so that you simply connect up to that instead of the QD's you use on the corny kegs. You could also, if you really wanted to, fit the Sanke coupler with ball lock posts so you don't need to change anything, just connect to the posts like you would on a corny keg.

If you don't already have a sanke coupler, I'd just get this one. These are the fittings if you already have a coupler.
__________________
Hopping Tango Brewery

跟猴子比丟屎 ・ Gun HOE-tze bee DIO-se

On Tap: Caramel Ale, Mocha Porter II, MO SMaSH IPA
Waiting/Carbonating: 12.5% Wee Honey II, 8.9% Old Ale, English Brown Ale, Lickah ESB, Mocha Porter II
Fermenting
K1:
K2: Epic mead
K3: TripSix
On Deck: Caramel Ale
Aging:mead
Mead [bottled]:Oaked Wildflower Traditional, Mocha Madness, Blackberry Melomel, maple wine
Golddiggie is offline
 
Reply With Quote
Old 12-01-2012, 05:52 AM   #3
Antler
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Carbonear, Nl
Posts: 711
Liked 19 Times on 17 Posts

Default

Quote:
Originally Posted by Golddiggie
You need to have the sanke coupler, then install the mfl fittings (instead of the barbed fittings normally on the coupler) so that you simply connect up to that instead of the QD's you use on the corny kegs. You could also, if you really wanted to, fit the Sanke coupler with ball lock posts so you don't need to change anything, just connect to the posts like you would on a corny keg.

If you don't already have a snake coupler, I'd just get this one. These are the fittings if you already have a coupler.
Thanks!
Antler is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale - All-grain Sanke Keggle setup jmoney7728 For Sale 10 12-10-2012 11:54 AM
Portable CO2 setup for sanke kegs HomeBrewFoSho Kegerators and Keezers 18 06-05-2012 11:34 PM
Curious as to what you need for a Sanke setup? WortMonger Equipment/Sanitation 15 07-06-2011 02:48 PM
Sanke Setup Question ezzieyguywuf Bottling/Kegging 38 12-25-2010 01:02 PM
Sanke->Corny->Corny transfer Flyin Bottling/Kegging 8 02-05-2010 05:12 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS