Two single CO2 Regulators converting to a double. - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Two single CO2 Regulators converting to a double.

Reply
 
Thread Tools
Old 11-30-2012, 02:41 AM   #1
bigthomp
Recipes 
 
Nov 2012
Posts: 1


I have two single regulators for my co2 tank and was looking to make them one. Can I by a double threaded two inch attatchment and just remove the gauge on one and the co2 in on the other and connect them together?

 
Reply With Quote
Old 11-30-2012, 04:30 AM   #2
day_trippr
Recipes 
 
May 2011
Stow, MA
Posts: 17,186
Liked 2934 Times on 2190 Posts


Yup, you just have to match the threads at both ends (right vs left) of the 2" brass 1/4" pipe nipple as not all regulator ports (in and out) use right-hand threads...

Cheers!

 
Reply With Quote
Old 11-30-2012, 06:39 AM   #3
arin
Recipes 
 
Dec 2008
Tucson, AZ
Posts: 18

I have had a hell of a time finding the right threaded nipple for this same project. I think my regulators would require 1/4" left-handed threads on both sides. Please post a link here if you find one.

 
Reply With Quote
Old 11-30-2012, 07:14 AM   #4
grandequeso
Recipes 
 
Aug 2012
jacksonville, fl
Posts: 184
Liked 11 Times on 11 Posts


midwest brewing has what you're looking for. I had the same problem. I keep finding regs for between 50 cent and $5 at the local flea market.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting single tap to 2 or 3 tap kegerator brobeman Bottling/Kegging 5 02-29-2012 04:28 AM
Double Batch Single Hop IPA YunkMunk Recipes/Ingredients 1 02-03-2012 02:22 AM
double out of a single? BrianP123 Extract Brewing 3 12-09-2010 03:05 PM
converting a single tower to a dual Mainebrew Bottling/Kegging 10 11-21-2008 08:23 PM
Cutting down my brewstand--converting to semi-single tier Dude Equipment/Sanitation 2 03-03-2008 08:45 PM


Forum Jump