Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Fermenters > Sanke Conical Project
Reply
 
Thread Tools
Old 11-26-2012, 09:36 PM   #1
DrPhilGood
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Staten island, NY
Posts: 132
Liked 2 Times on 2 Posts

Default Sanke Conical Project

Hey guys so I've been dying to convert one of my sankes to a conical fermenter. I currently just us them right side up and a airlock + stopper combo. My plan thus far is to flip the sanke upside down, attached legs to it, and then drill in a hole in the top big enough for an input and airlock + stopper.

I have a 2" triclamp concentric reducer to 1.5" then a 90 degree triclamp elbow into a ball valve.

Nothing is set in stone right now I am hoping to get some creative discussion from HBTers. One topic I want to discuss is how should I do the top of the sanke? Should i cut a larger opening and then leave a glass lid with an air lock?

What is the best way to do transfers? I know gravity isn't going to be sufficient so I need to figure out a way to do CO2 transfers.

Just got my order in the mail from brewershardware.com so I'll attach a few pics of what I have so far.

Also I attached pictures of the legs that I will be constructing.


Click image for larger version

Name:	IMG_20121126_154215.jpg
Views:	1445
Size:	49.4 KB
ID:	85686   Click image for larger version

Name:	IMG_20121126_154440.jpg
Views:	1365
Size:	45.5 KB
ID:	85687   Click image for larger version

Name:	IMG_20121126_154452.jpg
Views:	1471
Size:	44.4 KB
ID:	85688   Click image for larger version

Name:	IMG_20121123_120422.jpg
Views:	1342
Size:	28.6 KB
ID:	85689  
DrPhilGood is offline
 
Reply With Quote
Old 11-26-2012, 09:46 PM   #2
chickens4life
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: Fort collins, CO
Posts: 113
Liked 13 Times on 13 Posts
Likes Given: 17

Default

I would not go with a large hole for the top if you want to be able to transfer under CO2 pressure. I would go for a whole sized for one of the commonly available stopper sizes, that would be a little easier to maintain a seal on under 1-2 PSI of CO2.

I do have to say though, I don't see the advantage, unless you could add a racking port, or the lid had a steep enough angle to all you to dump yeast/trub.
I may just be missing something here though so feel free to enlighten me.


chickens4life is offline
 
Reply With Quote
Old 11-26-2012, 10:03 PM   #3
DrPhilGood
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Staten island, NY
Posts: 132
Liked 2 Times on 2 Posts

Default

Well I haven't thought of all the advantages as of yet. This is initially an ease of use/aesthetic project. Also, I wanted to be able to dump the yeast easier before racking. And with the proper co2 setup can easily transfer to other sankes for conditioning. A racking arm would be ideal but right now a stretch. This project is in its infancy but I love to think about all the possible sanke conversions.
DrPhilGood is offline
 
Reply With Quote
Old 11-26-2012, 11:36 PM   #4
Gonefishin
Junior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Gonefishin's Avatar
Recipes 
 
Join Date: Jul 2011
Location: BF, NC
Posts: 95
Liked 19 Times on 7 Posts

Default

Dr. Phil, I also have a Sanke that I am wanting to convert to a fermenter. I am planning to install a faucet as low as possible on the side of the keg to rack into kegs without disturbing the yeast/trub. Then open the bottom faucet to harvest the yeast for reuse. I have also decided to make the hole in the top large so I can get in and clean it effectively. I am currently using glass carboys and looking forward to getting away from them. The only thing I will miss is watching that great fermentation action in those glass caboys. (I do like that part.)
Gonefishin is offline
 
Reply With Quote
Old 11-27-2012, 01:35 AM   #5
daksin
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
daksin's Avatar
Recipes 
 
Join Date: Aug 2011
Location: San Diego, CA
Posts: 4,362
Liked 314 Times on 271 Posts
Likes Given: 344

Default

Not to burst any bubbles, but if you want a conical so you can dump trub/collect yeast, this isn't getting it done. You need a 60 degree slope (or at least close) or else your trub won't slide down to the port.
__________________
I can't be arsed to keep up this list of what's in the fermenters, but hey, check out the cool brewery I own!

twitter.com/2kidsbrewing .. facebook.com/2kidsbrewing .. 2kidsbrewing.com
daksin is offline
 
Reply With Quote
Old 11-27-2012, 07:58 PM   #6
emribecky
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2006
Location: Brewtown, WI
Posts: 46
Liked 8 Times on 7 Posts
Likes Given: 2

Default

I hate to rain on the DIY parade here as well, but that valve/TC combo isnt going to cut it. I bought the nice fancy 1.5" Butterfly valve from BrewersHardware.com and even then I have issues getting the yeast to dump sometimes. Your pics look like you have the 1.5" TC elbow reduced to 1/2" Ball Valve. I would be extremely surprised if you got any flow once the yeast starts to settle.
emribecky is offline
 
Reply With Quote
Old 11-27-2012, 08:18 PM   #7
mattd2
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: Papamoa, New Zealand
Posts: 3,640
Liked 281 Times on 224 Posts
Likes Given: 56

Default

Quote:
Originally Posted by daksin View Post
Not to burst any bubbles, but if you want a conical so you can dump trub/collect yeast, this isn't getting it done. You need a 60 degree slope (or at least close) or else your trub won't slide down to the port.
I actually read that 45 is enough, and the 60 was a throughback from when they first were developed and based off normal silo/hoppers for dry powders. But I agree, you want at least some sort of a cone to collect the yeast otherwise you will pull only the middle part and leave a lot behind. Just think about when you open up a corney once it is finished, I usually get pretty clear beer all the way to the end (no cut dip tunes or anything) but when I look inside the bottom is caked in sediment except a tiny area around the dip tube.
mattd2 is offline
 
Reply With Quote
Old 11-28-2012, 05:42 PM   #8
Gonefishin
Junior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Gonefishin's Avatar
Recipes 
 
Join Date: Jul 2011
Location: BF, NC
Posts: 95
Liked 19 Times on 7 Posts

Default

Bummer.
Gonefishin is offline
 
Reply With Quote
Old 11-28-2012, 08:21 PM   #9
DrPhilGood
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Staten island, NY
Posts: 132
Liked 2 Times on 2 Posts

Default

Boo! Well I had the TC parts lying around and thought I could do something interesting with them. Going to go through with the project anyways and see how it turns out. I appreciate the feedback and information. If it isn't successful I will turn it into a bottom drain MLT.
DrPhilGood is offline
 
Reply With Quote
Old 11-28-2012, 10:49 PM   #10
ScubaSteve
Feedback Score: 0 reviews
 
ScubaSteve's Avatar
Recipes 
 
Join Date: May 2007
Location: New Bern, NC
Posts: 3,692
Liked 72 Times on 52 Posts
Likes Given: 11

Default

Don't cut it before you read THIS. Unless you're specifically using the keg as a bottom drain vessel, you're going to waste a perfectly good fermenter.


ScubaSteve is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted Keg Conical fermenter project HBC Fermenters 3 10-23-2013 11:47 PM
Conical Project - Feedback Requested McTarnamins Fermenters 12 09-17-2010 04:03 AM
Conical or Sanke fermentor Wino24 Equipment/Sanitation 2 06-02-2010 03:33 AM
B3 conical to 1/6 sanke? mandoman General Techniques 2 02-23-2009 05:09 AM
Double Conical Project nearly complete McTarnamins Fermenters 3 12-19-2007 05:48 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS