Thread Identification - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Chillers & Stir Plates > Thread Identification

Reply
 
Thread Tools
Old 11-24-2012, 03:01 PM   #1
hustlebird
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Oct 2012
, Alexandria, VA
Posts: 79
Liked 2 Times on 2 Posts



Hey guys,

I just recently replaced my kitchen faucet, with one thats head pulls out as a sprayer (an American Standard Fairbury model). Anyway, I need a barb so I can hook my immersion cooler to it, but I just can't seem to find the barb. I tried emailing american standard, but they simply said 'other attachments aren't recommended and are incompatible with that faucet'. Great help right? I tried going to home depot, but they seem to only have NPT fittings... So that brings me here, asking for your help. I've tried to include pictures I thought were relevant. Thanks in advanced!


Click image for larger version

Name:	thread count.jpg
Views:	164
Size:	133.3 KB
ID:	85315   Click image for larger version

Name:	width.jpg
Views:	167
Size:	154.1 KB
ID:	85316  

 
Reply With Quote
Old 11-24-2012, 03:10 PM   #2
reynolds5520
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Jan 2010
Western Fingerlakes NY
Posts: 294
Liked 42 Times on 32 Posts


Maybe it would be easier to install a tee fitting in the supply line under the sink. Then you don't have to worry about identifying that thread size, finding a fitting to match, and possibly damaging those plastic threads when you take the head off and put it back on each time you brew. Not an answer to the question you asked, but that is what I would do.



Johnnyhitch1 Likes This 
Reply With Quote
Old 11-24-2012, 04:02 PM   #3
SuburbanBrewer
Recipes 
 
Dec 2011
Posts: 79
Liked 17 Times on 4 Posts


I agree with the adding a fitting. Those threads might not be a nominal size. Some companies make threads odd number of threads per inch on purpose. You should be able to go to hardware store and get a thread pitch gauge. Otherwise google it and buy one online.

 
Reply With Quote
Old 11-24-2012, 04:04 PM   #4
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,921
Liked 3180 Times on 1881 Posts


I'd be worried about the plastic threads as well. But have you tried the standard garden hose to sink adapter?

__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

Johnnyhitch1 Likes This 
Reply With Quote
Old 11-24-2012, 06:14 PM   #5
hustlebird
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Oct 2012
, Alexandria, VA
Posts: 79
Liked 2 Times on 2 Posts


Quote:
Originally Posted by reynolds5520 View Post
Maybe it would be easier to install a tee fitting in the supply line under the sink. Then you don't have to worry about identifying that thread size, finding a fitting to match, and possibly damaging those plastic threads when you take the head off and put it back on each time you brew. Not an answer to the question you asked, but that is what I would do.
Thats brilliant! Not sure why I hadn't thought of that myself. I'll have to go poke around home depot today, see if I can get a hose adapter t'd off the cold line. That should work awesome!

Revvy, I haven't actually tried the garden hose sink adapter because the pictures shown are actually the areator portion, the sink has female threads that this head screws into.

The faucet side (where i'd be screwing into) is metal, so thats why I didn't really worry to much. The threads shown in the picture are the ones I need to replicate in order to tie into the sink.

 
Reply With Quote
Old 11-24-2012, 07:00 PM   #6
Johnnyhitch1
Recipes 
 
Dec 2011
SiX-ThReE-OnE, NY
Posts: 2,131
Liked 245 Times on 205 Posts


Quote:
Originally Posted by hustlebird View Post

Revvy, I haven't actually tried the garden hose sink adapter because the pictures shown are actually the areator portion, the sink has female threads that this head screws into.

The faucet side (where i'd be screwing into) is metal, so thats why I didn't really worry to much. The threads shown in the picture are the ones I need to replicate in order to tie into the sink.
The garden hose/sink adapter is all you need if you have female threads on your sink.
Remove the airator replace with the adapter and voila you have garden hose threads for your chiller.

The T off the cold line makes for a more versatile and permenant solution IMO though.
__________________
^~~ "Like" it, Ill Give you beer ~~^
(({Brewing for the Movement Within}))

Primary:DUST
Kegged:AIR
BOTTLES:

Beer: NZ Brett (BD:9/16/12)
Mead: Blueberry-lemon, Raspberry-Lime, Habenero, POM, Traditional.

 
Reply With Quote
Old 11-25-2012, 02:09 AM   #7
beaksnbeer
HBT_LIFETIMESUPPORTER.png
 
beaksnbeer's Avatar
Recipes 
 
May 2011
New Port Richey, Florida
Posts: 2,844
Liked 505 Times on 334 Posts


That should work with a dishwasher connection kit at Lowes/HD


__________________
Quote:
Home of the 12 Tap keezer

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
hop identification???? dpfortier Beginners Beer Brewing Forum 3 09-28-2012 06:18 AM
Bug identification Norlin Hops Growing 6 06-25-2012 08:24 PM
Hop identification iowabrew Hops Growing 6 05-23-2012 09:39 PM
Need help - Tap Identification GRHunter Kegerators & Keezers 10 06-06-2010 11:18 PM
Mystery Hops Identification Thread cbg96 Hops Growing 3 10-05-2008 03:36 PM


Forum Jump