Adding a longer line to a tap-a-draft dispenser - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Adding a longer line to a tap-a-draft dispenser

Thread Tools
Old 11-21-2012, 10:41 AM   #1
Nov 2012
Posts: 2

Hi all,

I was wondering if any tap-a-draft owners had tried modifying the dispenser to add a longer line for bottling? I filled a couple of bottles from a tap-a-draft as an experiment, and it went pretty smoothly - I assume because of the lowish (~15 psi) pressure. However, having a few more inches of tubing would have made the job much easier.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding longer beer line to picnic tap 29thfloor Bottling/Kegging 6 09-26-2012 08:13 PM
Adding Length to Draft Tower Line msmith92 Bottling/Kegging 3 03-19-2012 06:28 PM
TAD Tap a draft extension line wootz001 Bottling/Kegging 0 12-25-2010 07:30 AM
where online can I buy longer beer line with cobra tap attached as1084 Bottling/Kegging 7 07-25-2010 03:01 AM
Using Draft Soda Dispenser for Beer trinitone Bottling/Kegging 9 12-18-2006 12:41 AM

Forum Jump