Bar Top Epoxy Recommendations - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Bar Top Epoxy Recommendations
Cool Brewing Corny 5G & Mini Giveaway

Thread Tools
Old 11-20-2012, 02:28 AM   #1
Join Date: Jun 2008
Location: Brownsburg, IN
Posts: 316
Liked 2 Times on 2 Posts

I've been searching the forum and have found a couple options, but want to make sure I am making the right choice before I pull the trigger. Has anyone had any particularly good or bad experiences with either Kleer Kote or Envirotex Lite epoxies? I am leaning towards Envirotex because I can just pick it up at the local hardware store.

What have others used and why? Are these any horror stories that I haven't considered? Is there a 3rd option that I'm not considering?

Reply With Quote
Old 11-20-2012, 02:43 AM   #2
Join Date: Aug 2012
Location: Pomeroy, Washington
Posts: 835
Liked 119 Times on 88 Posts

I've done table tops with kleer cote and a bar with gym seal.... i would recommend gym seal. It is exactly what it sounds like, the stuff is used to finish basketball courts. It's self levelling and extremely durable.

Reply With Quote
Old 11-20-2012, 02:49 AM   #3
Hop to it!
hungry4hops's Avatar
Join Date: Sep 2011
Location: aston, pa
Posts: 1,028
Liked 133 Times on 93 Posts
Likes Given: 584

I just coated our dinning room with parks super glaze from home depot 25 bucks for a quart the table was about 15 sq feet turned out awesome!

Reply With Quote
Old 11-20-2012, 05:21 PM   #4
Join Date: Dec 2010
Location: Dalton, GA
Posts: 48
Liked 12 Times on 4 Posts
Likes Given: 7

If you want a thick layer of epoxy on it, there is a product actually called "bar top" that you can buy at Sherwin Williams.

Reply With Quote

Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Can Epoxy touch the Wort? Joshenbrau Kettles, Mash Tuns, & Hot Liquor Tanks 3 06-10-2011 02:47 PM
My Epoxy beer StittsvilleJames Beginners Beer Brewing Forum 1 03-01-2011 12:23 AM
BPA-epoxy resin zelltj General Beer Discussion 2 10-16-2010 08:47 PM
Epoxy in mash tun? pokey Equipment/Sanitation 10 02-27-2010 04:58 PM
Epoxy and brewing... tireater Kettles, Mash Tuns, & Hot Liquor Tanks 13 04-12-2009 10:15 AM

Forum Jump