MIC connector ok for AC 120v and 24v? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > MIC connector ok for AC 120v and 24v?

Reply
 
Thread Tools
Old 11-18-2012, 09:45 PM   #1
Patirck
Recipes 
 
Apr 2010
Glendale, CA
Posts: 754
Liked 14 Times on 13 Posts



I am building a new control panel for my single tier and would like to use a 8 pin MIC connector in the wire path to control three pumps. I would most likely use solid core 16 gauge wire.

I would like to have a control panel that I could easily disconnect from the stand/pumps/thermistors/24v honeywell valves.

 
Reply With Quote
Old 11-18-2012, 09:46 PM   #2
Frige
Recipes 
 
Sep 2012
Houston, Texas
Posts: 554
Liked 68 Times on 48 Posts


I would use a weather pac connector if possible.

 
Reply With Quote
Old 11-19-2012, 03:39 AM   #3
Patirck
Recipes 
 
Apr 2010
Glendale, CA
Posts: 754
Liked 14 Times on 13 Posts


These look like they might do the job but I don't see any panel mount options. I really need something where I can mount the female end in the box (boy does that sound bad...)

 
Reply With Quote
Old 11-19-2012, 05:32 PM   #4
socalboomer
HBT_SUPPORTER.png
Recipes 
 
Mar 2011
Riverside, CA
Posts: 239
Liked 4 Times on 3 Posts


I know xlr connectors are good for 'phantom' power (if I remember correctly that's 70v) so you're good to go for 24v.

I wouldn't use them for 120 vac tho.

Wait, 8-pin? Should still be fine for 24v but I'd stay away from 120vac.
__________________
On Tap (Nitro): Chocolate Palomino
On Tap 1: Blueberry Blonde.On Tap 2: Imperial Red.On Tap 3: Moonless Midnight Hillbilly RIS
In Secondary: empty for now
In Primary: empty for now
Next up: Gold Dust Pale, Boxer Strings Nut Brown

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gas connector leak GLWIII Bottling/Kegging 1 05-21-2012 06:03 PM
sanke keg connector beeton Bottling/Kegging 6 10-31-2009 10:24 AM
Beer out connector RichBrewer Bottling/Kegging 6 02-03-2008 01:33 PM
leaky connector coyotlgw Bottling/Kegging 2 12-07-2007 03:29 PM
Keg connector parts? Khirsah17 Bottling/Kegging 5 07-31-2007 04:09 AM


Forum Jump