New manifold done and ready for sparging! - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > New manifold done and ready for sparging!

Reply
 
Thread Tools
Old 11-17-2012, 04:02 PM   #1


Got sick and tired of stuck sparges, fluctuating efficiency, and crappy vorlaufing due to mash paddle abuse to the braided line so I decided to build a manifold! Joints are cpvc and the tubes are rated up yo 180°F.

Click image for larger version

Name:	ForumRunner_20121117_110213.jpg
Views:	180
Size:	65.9 KB
ID:	84365

 
Reply With Quote
Old 11-17-2012, 04:17 PM   #2
Wynne-R
Recipes 
 
Aug 2009
Texas
Posts: 976
Liked 124 Times on 79 Posts


I have a square manifold with a single cross piece like yours. I replaced the cross pieces with solid (undrilled) tubing. It seems to have increased my efficiency a little bit in continuous sparging.

Mine is copper and slotted, but it ought to work the same.

You’ve probably got some left over tubing. You could try that if you feel like experimenting.

 
Reply With Quote
Old 11-17-2012, 04:27 PM   #3

I generally do batch sparges but it wouldn't hurt doing some experimentation.

 
Reply With Quote
Old 11-21-2012, 08:42 PM   #4

Just did a mock run with the new manifold using water and one drop of black food coloring near TDC of the tun. The dye followed the path of least resistance, the center slots and didnt even think of going near the outside ring. I will make sure to make the adjustments and put a solid piece in the center, thanks again Wynne.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
fly sparging vs. batch sparging michaelpeach76 General Beer Discussion 13 10-03-2012 12:16 PM
Wort ready to be pitched...yeast starter not so ready Silverbullet Fermentation & Yeast 3 07-05-2012 06:03 PM
pilsen ready but not ready for lagering? maltbarleyhops Fermentation & Yeast 6 07-20-2011 03:41 AM
CPVC manifold for batch sparging allanmac00 All Grain & Partial Mash Brewing 15 01-18-2010 02:46 AM
Manifold Sparging problems thedisasterparty All Grain & Partial Mash Brewing 10 11-10-2009 05:44 PM


Forum Jump