What is Your Efficiency - batch Spargers - Page 5 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > What is Your Efficiency - batch Spargers

Reply
 
Thread Tools
Old 11-21-2012, 06:31 AM   #41
Bricks41
Recipes 
 
Aug 2012
Dublin, OH
Posts: 241
Liked 19 Times on 15 Posts


Quote:
Originally Posted by mforsman
Consistently getting 60-62% from both my LHBS and NB. I keep changing one thing, giving it another go, checking, and pressing on. Really a bummer, time to review everything again.
If you are not milling your own grain, that is the most likely cause. I did the same thing as you; went through my process step by step to find the issue... came down to my crush.

Bought a mill, went from the low 60's to 78% on my last batch.

 
Reply With Quote
Old 11-21-2012, 07:11 AM   #42
mforsman
HBT_SUPPORTER.png
 
mforsman's Avatar
Recipes 
 
Feb 2011
Astoria, NY
Posts: 244
Liked 14 Times on 12 Posts


I suppose that's the next step. So much gear in this tiny apartment, I was hoping that I could avoid it. I'll start saving.
__________________
Homebrew Site: forsmanbrewing.com

 
Reply With Quote
Old 11-21-2012, 04:01 PM   #43
tre9er
 
tre9er's Avatar
Recipes 
 
Jan 2012
Lincoln, NE
Posts: 4,371
Liked 242 Times on 197 Posts


Quote:
Originally Posted by mforsman View Post
I suppose that's the next step. So much gear in this tiny apartment, I was hoping that I could avoid it. I'll start saving.
Bucket-mounted Corona mill takes up no extra space if you nest it inside another bucket you already have. Don't let anyone tell you they don't make good beer, either. I use one, as does Revvy and countless others. $30 shipped=can't beat it.
__________________
_________________________________
Skal!
Den Faaborg Bryggeri

Quote:
Originally Posted by davekippen View Post
Open log Fermenting and gas-can secondary?? I am planning my next brew right now!!

 
Reply With Quote
Old 11-22-2012, 04:10 AM   #44
brewyourown4life
Recipes 
 
Feb 2008
waterloo, IA
Posts: 167
Liked 4 Times on 4 Posts


82-85 %

 
Reply With Quote
Old 11-23-2012, 06:19 AM   #45
mistercameron
Recipes 
 
Jan 2011
SD, Ca
Posts: 390
Liked 16 Times on 11 Posts


I'm in the 80s since getting my own mill. The turning point for me was when the LHBS gave me some bad milled grains a few times in a row.... In the 50s.

I condition most of my batches before milling and set the gap real tight - about 0.032". I use a Grain bag like BIAB so I don't need to worry about stuck sparges, even if I get a lot of flour. It's been working like a charm.

 
Reply With Quote
Old 11-23-2012, 02:45 PM   #46
LakesideBrewing
Recipes 
 
Mar 2012
Methuen, MA
Posts: 504
Liked 579 Times on 150 Posts


I've only been getting around 75%, but I'm happy with that. I just formulate everything around that. I recently got a 55% and I was freaking out. A few weeks later I was at my LHBS and saw the owner replacing the mill. I asked him why and he said 'the old one sucks'. Right there I realized just how important a good crush can be.

-Mike

 
Reply With Quote
Old 11-23-2012, 04:09 PM   #47
downtown3641
 
downtown3641's Avatar
Recipes 
 
Mar 2011
Fredericksburg, Virginia
Posts: 572
Liked 94 Times on 42 Posts


I get about 75% with grain crushed by my LHBS. I'm satisfied with that.
__________________
Kegged: Dusseldorf Altbier, Mild
Up next: Belgian Wheat/Rye, Kolsch

 
Reply With Quote
Old 12-02-2012, 11:25 PM   #48
jma99
HBT_LIFETIMESUPPORTER.png
 
jma99's Avatar
Recipes 
 
Jul 2006
Duluth, MN, You Betcha!
Posts: 378
Liked 15 Times on 13 Posts


Grasshopper, you are missing the point.

It is not important what your efficiency is, it IS important that your efficiency be consistent!

(Mine is allways a couple of points around 75%)
__________________
God's own drunk, and a fearless man.

 
Reply With Quote
Old 12-03-2012, 10:05 AM   #49
diS
 
diS's Avatar
Recipes 
 
Apr 2011
Croatia
Posts: 997
Liked 49 Times on 46 Posts


Agree.
I would rather have constant 70% than unsteady 80s%.

So far I am in 75-80% range, but I am still managing my process to keep it continuous.
__________________
We are only 10,000 years into beer... there are thousands of years left to go!
Things are bound to change!!

Brewroom with HERMS build
Fermentation chamber and Keezer.. a.k.a. FermKeezer

 
Reply With Quote
Old 12-03-2012, 06:56 PM   #50
Denny
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Jun 2005
Eugene, OR
Posts: 4,864
Liked 678 Times on 487 Posts


Yesterday's brew was 89% efficiency into the fermenter. A bit higher than normal, but not much.
__________________
Life begins at 60....1.060, that is!

www.dennybrew.com

http://www.experimentalbrew.com - "Homebrew All Stars" now shipping!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
To all the batch spargers Walker All Grain & Partial Mash Brewing 40 11-08-2009 02:51 PM
Question for batch spargers mangine77 All Grain & Partial Mash Brewing 27 12-22-2008 04:05 PM
batch spargers; how do you add your water? squiggy All Grain & Partial Mash Brewing 11 02-22-2008 04:22 AM
Batch Spargers Need to Confer DeadYetiBrew General Techniques 13 12-04-2007 07:58 PM
Batch Spargers: Mashout, Yea or Nay? brewt00l All Grain & Partial Mash Brewing 27 10-29-2007 08:08 PM


Forum Jump