BCS-460 Violent Boil - turn down? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Electric Brewing > BCS-460 Violent Boil - turn down?

Reply
 
Thread Tools
Old 11-01-2012, 04:22 PM   #1
dutchb
Recipes 
 
Dec 2011
milan, pa
Posts: 55
Liked 2 Times on 2 Posts



Hi Guys,

I've brewed a few batches on my new electric BCS-460 system and I've noticed that when im boiling I tend to have a very violent boil.
The problem is, if I set the temp for 212, the boil is very violent, and then once the temp reaches 212 it shuts off - once it falls down a few degrees it takes back off again and works it way back up to 212 then shuts off again. I get that this is the point of reaching a temp and shutting down but is there a way I can hold a constant temp instead?

 
Reply With Quote
Old 11-01-2012, 04:33 PM   #2
DrewF
Recipes 
 
Aug 2010
PA
Posts: 26
Liked 2 Times on 2 Posts


Instead of using a temperature setpoint for boiling, I would suggest directly controlling the the element. Also, you can lower the "duty cycle controlled" percentage to something less than 100% to control the intensity of the boil.

 
Reply With Quote
Old 11-01-2012, 06:57 PM   #3
mateomtb
HBT_SUPPORTER.png
Recipes 
 
Jan 2011
Pine, Co
Posts: 123
Liked 8 Times on 8 Posts


What I do is set my state to heat until it reaches 192 which is just under boil (for my location boil is 195) then it switches states to be in PWM mode (default settings) at 50%. Here is what that looks like.

http://www.homebrewtalk.com/f170/boi...lement-360319/

 
Reply With Quote
Old 11-06-2012, 12:39 AM   #4
dutchb
Recipes 
 
Dec 2011
milan, pa
Posts: 55
Liked 2 Times on 2 Posts


Thanks for the info guys, this is what I was looking for. I completely forgot about adjusting the duty cycle. I'll be testing it out this weekend.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Couldn't get Wort to rolling boil... Will it turn out fine? kbubar Beginners Beer Brewing Forum 11 04-12-2013 03:02 AM
I had to cut my boil short ~2 minutes after a DME addition. Will it turn out OK? quark42 General Beer Discussion 4 10-01-2012 03:33 PM
VIOLENT fermentation!! Why?? metalbrewer Fermentation & Yeast 13 01-31-2012 05:10 AM
Violent Fermentation brewser09 Extract Brewing 4 11-29-2010 09:14 PM
Violent Fermentation! Bartman Fermentation & Yeast 4 01-03-2010 10:45 PM


Forum Jump