My Weldless Build Using Strut - Page 26 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > My Weldless Build Using Strut

Reply
 
Thread Tools
Old 01-22-2013, 08:45 PM   #251
b-boy
16%er
HBT_LIFETIMESUPPORTER.png
 
b-boy's Avatar
Recipes 
 
Jun 2011
The Frozen Tundra, NY
Posts: 4,371
Liked 1218 Times on 795 Posts


Quote:
Originally Posted by ultimatesports View Post
I just placed an order for a BIAB stand setup. Just for anyone's information, if you give them the lengths you need they will cut it for you for free and charge you by the foot. I paid the little extra $ than the Lowes channel to not have to hassle with getting a blade and cutting the metal. When you factor your time in its actually way cheaper and faster to have them cut your lengths.

Just an FYI
You're talking about g-p llc?
__________________
Never underestimate the potential of someone who refuses to act their age.

 
Reply With Quote
Old 01-22-2013, 10:08 PM   #252
ultimatesports
Recipes 
 
Nov 2011
Kentwood, MI
Posts: 12

That is correct

 
Reply With Quote
Old 01-22-2013, 10:34 PM   #253
LiquidFlame
HBT_LIFETIMESUPPORTER.png
 
LiquidFlame's Avatar
Recipes 
 
Apr 2011
Normal, IL
Posts: 629
Liked 53 Times on 33 Posts


Wish I knew about that, probably would have bought the black powder coat strut pre-cut.
__________________
Beer For Trade
Fermentation Chamber Build
Untappd: LiquidFlame
YouTube: BeerGeekGamer
Twitch: BeerGeekGamer
Instagram: BeerGeekGamer
Twitter: BeerGeekGamer

 
Reply With Quote
Old 01-22-2013, 11:38 PM   #254
BroStefan
Brewer
HBT_SUPPORTER.png
 
BroStefan's Avatar
Recipes 
 
Jan 2012
St Cloud, MN
Posts: 277
Liked 25 Times on 18 Posts


Quote:
Originally Posted by ultimatesports
I just placed an order for a BIAB stand setup. Just for anyone's information, if you give them the lengths you need they will cut it for you for free and charge you by the foot. I paid the little extra $ than the Lowes channel to not have to hassle with getting a blade and cutting the metal. When you factor your time in its actually way cheaper and faster to have them cut your lengths.

Just an FYI
Could you describe your design, or put up a sketch. I'm been playing with ideas for a BIAB design myself.

 
Reply With Quote
Old 01-23-2013, 12:44 AM   #255
ultimatesports
Recipes 
 
Nov 2011
Kentwood, MI
Posts: 12

I'll do my best to describe it, since I didn't draw it out. I ended up going w a bit simpler design than my original plan also. To preface, I have a 62 qt Bayou Classic pot with the basket. Currently when I'm done mashing I pull the basket up by hand and have a buddy (or fiancÚ) put a stainless steel grill grate that fits exactly over my pot down, and I set the basket over that.

Anyway, my stand will be 16" wide x 16" deep. 24" tall. The stand will basically be a rectangle . I opted for the 8 hole angle brackets which ate probably overkill, but why not There will also be a strut piece across the front and back, about halfway down. This will have a piece of metal across it making a shelf for the banjo burner. I'm then mounting a piece of 10' strut to my garage ceiling. They make a "trolley" that has wheels and will slide within the strut channel. My plan is to hook up a motorized hoist (harbor freight $100) to that trolley and could assist brew friends lifting their bags out, etc as well as my own.

I will post the parts list of what I would have used if I attached a BIAB arm to the stand to help with lifting the basket out. I would suggest looking at their wing fittings, angle fittings, and shelf brackets and I guarantee you could envision any number of arm designs that would work.

Think erector set for adults

 
Reply With Quote
Old 01-23-2013, 03:09 AM   #256
LuiInIdaho
HBT_LIFETIMESUPPORTER.png
 
LuiInIdaho's Avatar
Recipes 
 
Feb 2011
Ponderay, Idaho
Posts: 441
Liked 29 Times on 23 Posts


I'm then mounting a piece of 10' strut to my garage ceiling. They make a "trolley" that has wheels and will slide within the strut channel. My plan is to hook up a motorized hoist (harbor freight $100) to that trolley and could assist brew friends lifting their bags out, etc as well as my own.

[/QUOTE]

With a setup like this, anyone can have a hoist for BIAB or what ever you have to lift and move.

Mark

 
Reply With Quote
Old 01-23-2013, 03:19 AM   #257
jdesch75
Recipes 
 
Mar 2012
Posts: 20

Quick question. I love the material design. I'm thinking of making the stand 6ft long to accommodate a 3 station burner setup. Do you think I will need to add center pieces for stability? If so what connections do you think I can use to get the center pieces in since I won't be at a corner?

 
Reply With Quote
Old 01-23-2013, 03:48 AM   #258
ultimatesports
Recipes 
 
Nov 2011
Kentwood, MI
Posts: 12

There are lots of different bracket options. You could get L type brackets and have the strut facing sideways. That would allow you to bolt it to the bottom on 1 side by the channel, and on the other side by the slots in the strut.

If it were me and I was making one that big I would certainly but something in the middle for stability and to brace it. I am assuming you will have crossmembers on the "top" of your stand much like the original poster for your pots to rest on. I would bolt a strut to each one of this vertically in the front and back using an L or 90 degree bracket.

 
Reply With Quote
Old 01-23-2013, 12:11 PM   #259
jdesch75
Recipes 
 
Mar 2012
Posts: 20

Good point! I think I'll have to get creative with the brackets and mounts so I can keep places to mount pumps and such

 
Reply With Quote
Old 01-23-2013, 01:35 PM   #260
stratslinger
HBT_SUPPORTER.png
 
stratslinger's Avatar
Recipes 
 
Dec 2010
Terryville, CT
Posts: 2,507
Liked 215 Times on 179 Posts


OK, another question occurs to me, looking at a couple of the designs (the very first one in particular).

Looking at a few welded brew stands, I've seen various methods designed to ensure that the kettles stay right where they belong - whether there's a "lip" that runs around the outside edge to keep the kettle from ever shifting, or cross beams going at 45 degree angles across the corners to catch the kettle should it ever shift, there's usually _something_ there.

But in most of these strut designs, I just don't see that. And I don't think I see any strut components that would seem appropriate to the purpose. Am I missing something, or just overcomplicating things?

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Weldless Shelving Single Tier Brew Stand + Fermentation Rack build Zamial Brew Stands 15 06-01-2015 06:45 PM
Need Weldless Bulkhead Kit for Keggle Build JMSetzler Kettles, Mash Tuns & Hot Liquor Tanks 5 05-10-2012 11:52 PM
Single tier weldless brewstand build tulsabrewdaddy Brew Stands 35 01-31-2012 03:31 PM
***Weldless Bottle Caper Build*** JewBrew DIY Projects 12 05-26-2010 02:16 PM
My Weldless Electric HERMS build jcdillin Brew Stands 94 12-04-2009 02:11 AM


Forum Jump