Motors and Gas Valves - Home Brew Forums

Register Now!
Home Brew Forums > Home Brew Market > For Sale > Motors and Gas Valves

Reply
 
Thread Tools
Old 10-22-2012, 01:23 AM   #1
petrostar
Recipes 
 
Jun 2008
Tacoma, Wa
Posts: 459
iTrader: (0)
Liked 5 Times on 5 Posts



I have three motors for sale right now. One is 1/2 HP the other two are 1/3 HP they are all in great condition. I have personally tested each speed and they function flawlessly. The motors also have tri clamp belly bands which I will include. I also have two standing pilot gas valves. I have converted the valves to LP gas also. They valves were checked with 24v to verify flawless operation. I will attach photos and all costs will be via USPS flat rate boxes so shipping costs will be the same for everybody. First come first serve. I am selling these at rock bottom prices to fund my Grain mill which these motors are perfect for. They all run at 1075rpms at High speed. Thanks for looking and I will ship same day or next day depending when I receive money via paypal. All Parts are used but in great condition.

1/2HP motor $70 Shipped
1/3HP motors $60 Shipped

Standing Pilot Gas Valves $50 Each Shipped or $90 for the pair.
Click image for larger version

Name:	20121021_173839.jpg
Views:	878
Size:	66.3 KB
ID:	80472   Click image for larger version

Name:	20121021_173922.jpg
Views:	873
Size:	60.8 KB
ID:	80473   Click image for larger version

Name:	20121021_173933.jpg
Views:	869
Size:	64.3 KB
ID:	80474   Click image for larger version

Name:	2012-04-05_14-56-22_0.jpg
Views:	865
Size:	40.5 KB
ID:	80475   Click image for larger version

Name:	20121021_174316.jpg
Views:	876
Size:	43.7 KB
ID:	80476  


 
Reply With Quote
Old 10-22-2012, 01:54 AM   #2
marcb
Recipes 
 
Apr 2012
Santa Clara, CA
Posts: 1,110
iTrader: (4)
Liked 209 Times on 144 Posts


In one pic it shows pressure max1/2 psi. Looks like these are too low to even use on a low pressure LP system......

 
Reply With Quote
Old 10-22-2012, 01:54 AM   #3
marcb
Recipes 
 
Apr 2012
Santa Clara, CA
Posts: 1,110
iTrader: (4)
Liked 209 Times on 144 Posts


Quote:
Originally Posted by marcb
In one pic it shows pressure max1/2 psi. Looks like these are too low to even use on a low pressure LP system......
My bad, these are pilot valves.... Sorry!

 
Reply With Quote
Old 10-22-2012, 02:16 AM   #4
petrostar
Recipes 
 
Jun 2008
Tacoma, Wa
Posts: 459
iTrader: (0)
Liked 5 Times on 5 Posts


You don't have to use the pilot valves. These are about 7-11"" wc on the outlet side. Great for low pressure setups. I'm using 2 mv gas valves on my 100,000 btuh low pressure jet burners. Works awesome.

 
Reply With Quote
Old 10-22-2012, 09:05 PM   #5
petrostar
Recipes 
 
Jun 2008
Tacoma, Wa
Posts: 459
iTrader: (0)
Liked 5 Times on 5 Posts


One 1/3hp motor with cap and belly band sold.

 
Reply With Quote
Old 10-23-2012, 03:02 AM   #6
petrostar
Recipes 
 
Jun 2008
Tacoma, Wa
Posts: 459
iTrader: (0)
Liked 5 Times on 5 Posts


Bump

 
Reply With Quote
Old 10-26-2012, 11:58 PM   #7
petrostar
Recipes 
 
Jun 2008
Tacoma, Wa
Posts: 459
iTrader: (0)
Liked 5 Times on 5 Posts


All parts 5 dollars cheaper this weekend only. Will ship same day. Any questions at all please ask me, I will answer very quickly. Thanks!

 
Reply With Quote
Old 10-27-2012, 12:59 AM   #8
Hawkdiesel
Recipes 
 
Jan 2011
Elmhurst, Il
Posts: 122
iTrader: (0)

Quote:
Originally Posted by petrostar
All parts 5 dollars cheaper this weekend only. Will ship same day. Any questions at all please ask me, I will answer very quickly. Thanks!
Please bear with me here. How exactly do I get this to work with my grain mill?

 
Reply With Quote
Old 10-27-2012, 01:55 AM   #9
petrostar
Recipes 
 
Jun 2008
Tacoma, Wa
Posts: 459
iTrader: (0)
Liked 5 Times on 5 Posts


With either a gear motor to reduce rams or a 2-3 inch sheave on blower shaft bad a 10-12" pulley connected to your grain mill shaft. Plans are all over on this site.

 
Reply With Quote
Old 11-10-2012, 02:01 AM   #10
petrostar
Recipes 
 
Jun 2008
Tacoma, Wa
Posts: 459
iTrader: (0)
Liked 5 Times on 5 Posts


$10.00 dollars off this weekend only!!! Pm with any questions. Thanks

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Which motors for a Monster Mill 2-2.0? Jukas DIY Projects 11 09-05-2012 09:12 PM
Gas Valves & Motors petrostar For Sale 2 05-03-2012 11:50 PM
Grain Mill Motors.. goybar DIY Projects 3 03-04-2012 02:06 PM
Shut-Off Valves and Integral Check Valves HenryHill Bottling/Kegging 6 01-21-2011 10:50 PM
Small Outboard Motors Fletch78 General Chit Chat 16 04-17-2010 12:44 PM


Forum Jump