connecting a 1-1/4" npt element to a 2" triclamp? - Page 2 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Electric Brewing > connecting a 1-1/4" npt element to a 2" triclamp?

Reply
 
Thread Tools
Old 10-19-2012, 12:33 AM   #11
WPStrassburg
Recipes 
 
Sep 2008
Rochester, NY
Posts: 584
Liked 37 Times on 32 Posts


I had mine welded up for a 1.5" or 2" npt to 2.5" triclover for my element adapter.



Similar to the still adapter I bored and threaded a 1.5" triclover for a standard 1" element.



http://www.homebrewtalk.com/f51/my-6...s-tube-217754/

 
Reply With Quote
Old 10-19-2012, 02:02 PM   #12
alien
Recipes 
 
Apr 2012
Philadelphia, PA
Posts: 1,235
Liked 68 Times on 59 Posts


Another way to go might be to get a long 2" triclamp ferrule, solder on a copper disk, drill a hole in the disk, then solder a locknut over the hole.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Connecting 3/16" poly beer line to 1/4" ball-lock disconnect? kal Bottling/Kegging 28 02-10-2016 10:09 PM
1-1/2" Triclamp Barb Fittings Moby For Sale 15 10-01-2012 01:11 PM
1.5" Tri Clover X 1" NPS Element Adapter and Stout Tanks & Kettles Will_M Electric Brewing 17 09-05-2012 11:42 AM
Source for 2" triclamp to 1/2" npt adapter? iandh Kettles, Mash Tuns & Hot Liquor Tanks 6 09-20-2011 01:25 PM
Reviews for heating element and controller in-one "Electric Sparge/Mashing Heater" kegtoe Brew Stands 26 12-17-2010 09:52 PM


Forum Jump