Thermometer suggestion - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Thermometer suggestion

Reply
 
Thread Tools
Old 10-15-2012, 02:13 PM   #1
christopherrburns
Registered User
Recipes 
 
Oct 2011
Chicago, il
Posts: 139
Liked 17 Times on 10 Posts



Any suggestions for waterproof thermometers. I like Keeping a probe in my mash tun, but have gone through at least three thermometers in the past year. All ended up going for a swim either in my sparge water or in the tun, and no I was not drinky during the brew. Any suggestions, other then don't be a dumbass and keep your thermometer out of the water. Thanks

 
Reply With Quote
Old 10-15-2012, 02:20 PM   #2
BirdmanBrewingCo
Recipes 
 
Jun 2011
Cincinnati, OH
Posts: 978
Liked 25 Times on 23 Posts


Not sure if you are looking for digital...but there was another recent thread on thermometers that has some good recos. THIS ONE seems to get top reviews but is also the most expensive, and splash proof, not necessarily full water proof.

There is a CDN - THIS ONE I believe that folks like. And I think you can get it from one of the forum sponsor's at a good price (BrewHardware). Always nice to support the sponsors.

christopherrburns Likes This 
Reply With Quote
Old 10-15-2012, 02:26 PM   #3
christopherrburns
Registered User
Recipes 
 
Oct 2011
Chicago, il
Posts: 139
Liked 17 Times on 10 Posts


I've typically used thermometers with a wire probe that I can keep in my mash to monitor the temp. Perhaps I just need to give in to the fact that I'm too clumsy to keep using these and just get a fixed probe thermometer.

 
Reply With Quote
Old 10-15-2012, 02:31 PM   #4
kh54s10
HBT_SUPPORTER.png
 
kh54s10's Avatar
Recipes 
 
Aug 2011
Tiverton, Rhode Island
Posts: 10,613
Liked 1578 Times on 1298 Posts


Quote:
Originally Posted by christopherrburns View Post
I've typically used thermometers with a wire probe that I can keep in my mash to monitor the temp. Perhaps I just need to give in to the fact that I'm too clumsy to keep using these and just get a fixed probe thermometer.
Most of the wire probes on the thermometers are not meant to be submerged. Maybe you can make a waterproof well out of a length of copper tubing to keep one alive longer.

 
Reply With Quote
Old 10-15-2012, 02:32 PM   #5
brewser7
Recipes 
 
Jan 2012
, Missouri
Posts: 139
Liked 3 Times on 3 Posts


I visited the forums this morning specifically for this reason. To figure out what type of thermometer works well for brewing and what do you know, it was the top thread. I had major issues with my last brew tasting funky and couldn't figure it out, I'm guessing it was my mash. For my brew session yesterday I grabbed 2 thermometers and there was a 20 degree difference!! I figured it was time for a new one... Thanks for the suggestions Birdman.

 
Reply With Quote
Old 10-15-2012, 02:35 PM   #6
christopherrburns
Registered User
Recipes 
 
Oct 2011
Chicago, il
Posts: 139
Liked 17 Times on 10 Posts


Quote:
Originally Posted by kh54s10 View Post
Most of the wire probes on the thermometers are not meant to be submerged. Maybe you can make a waterproof well out of a length of copper tubing to keep one alive longer.
The probe is fine but it's the digital read out that keeps getting a bath.

 
Reply With Quote
Old 10-15-2012, 02:36 PM   #7
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,195
Liked 1654 Times on 1069 Posts


There are two ways to waterproof a remote probe thermo. One is to bend the tube on the probe straight and put it down a long tube that you've crimped and soldered shut. The other is to force the probe into some narrow silicone tubing. If you buy a CDN DTTC from me, I'll include a length of the tubing you'll need.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 10-15-2012, 02:41 PM   #8
kh54s10
HBT_SUPPORTER.png
 
kh54s10's Avatar
Recipes 
 
Aug 2011
Tiverton, Rhode Island
Posts: 10,613
Liked 1578 Times on 1298 Posts


Quote:
Originally Posted by kh54s10 View Post
Most of the wire probes on the thermometers are not meant to be submerged. Maybe you can make a waterproof well out of a length of copper tubing to keep one alive longer.
Quote:
Originally Posted by christopherrburns View Post
The probe is fine but it's the digital read out that keeps getting a bath.
Well, that end is definitely a problem. I have not seen any wire probe thermometers where the readout end is waterproof. Maybe you could mount one inside a sealed clear plastic box and mount that somewhere that it will not get doused!

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stand alone thermometer or thermometer/sightglass adivito Kettles, Mash Tuns & Hot Liquor Tanks 5 04-13-2011 06:39 AM
Blichmann Thermometer vs Bobby_M's EZ Weldless Sight/Thermometer Combo Pivzavod Equipment/Sanitation 14 07-18-2010 12:01 AM
Looking for Thermometer Suggestion Lodovico Equipment/Sanitation 10 02-24-2010 12:29 AM
insulation for thermometer in brew kettle? thermometer face fogging/gets too hot! chainsawbrewing Kettles, Mash Tuns & Hot Liquor Tanks 3 02-22-2010 03:12 PM
Floating thermometer or dial thermometer? nigel31 Beginners Beer Brewing Forum 3 11-05-2009 11:59 AM


Forum Jump