Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Another brew stand - 10 months in the making
Reply
 
Thread Tools
Old 10-11-2012, 08:56 PM   #1
rbstryker
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Vancouver, Washington
Posts: 42
Liked 4 Times on 4 Posts
Likes Given: 11

Default Another brew stand - 10 months in the making

This has been an ongoing 10 month build. A really good friend of mine is a welder/fabricator and has no interest in the beer making process, but loves to make things, so it worked out to be a good partnership for this project. We started in January of 2012, and I knew this would be a long ongoing project, so I decided against a thread until it was complete. We began with the Brutus 10 idea, took a little from Kal's and put some of our own ideas into it as well.

There's still some kettle work to be done, so over the next few days I'll be updating some more.

Started with 2" square tubing. We decided that this build would be a prototype for a future stand, so we can learn as we go. The next one will be all stainless.

Everything was TIG welded.


Click image for larger version

Name:	426262_478841415483537_368032516_n.jpg
Views:	2877
Size:	54.0 KB
ID:	79133  
__________________
Rodney Stryker
Head Brewer | Heathen Brewing
Facebook
Twitter

My HERMS Stand Build
rbstryker is offline
 
Reply With Quote
Old 10-11-2012, 09:07 PM   #2
rbstryker
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Vancouver, Washington
Posts: 42
Liked 4 Times on 4 Posts
Likes Given: 11

Default More Progress

Got the wind shields all in place, pump mounts, and casters on. We then decided to change our burner design after playing with the cast iron jet burners for a while. In my opinion (there is a lot of opinion on this forum) the 10" banjo burners have a much higher level of control, so we changed things up a bit mid way through the build.

Decided to go with a gas manifold mounted to strut rather than using the back bracket as the manifold. Again, going for the highest level of control. And if something went wrong, or we wanted to change something later on, it'd be easier with strut and a manifold.

All of the gas lines/fittings were TIG welded. Didn't want to mess with gas leaks.


Click image for larger version

Name:	230918_478841428816869_2004839320_n.jpg
Views:	2677
Size:	64.1 KB
ID:	79138   Click image for larger version

Name:	539312_478841662150179_1592986952_n.jpg
Views:	4244
Size:	78.7 KB
ID:	79139  
__________________
Rodney Stryker
Head Brewer | Heathen Brewing
Facebook
Twitter

My HERMS Stand Build
rbstryker is offline
 
Reply With Quote
Old 10-11-2012, 09:08 PM   #3
moboy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Lebanon, MO
Posts: 79
Liked 3 Times on 2 Posts

Default

Nice looking stand, how tall is it?

Matt
moboy is offline
 
Reply With Quote
Old 10-11-2012, 09:18 PM   #4
rbstryker
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Vancouver, Washington
Posts: 42
Liked 4 Times on 4 Posts
Likes Given: 11

Default More...

There are TONS of great ideas on this forum. Thank you to everyone for posting your ideas.

We looked at a number of panel arm ideas, and I wanted something that would swing/fold for easy storage. So we settled for a swing type. Teflon bushings were cut out from an old cutting board, then turned on the lathe.

Originally we wanted to run all the electrical through the tubing and into conduit below, but I kept adding more components so conduit all the way was necessary.
Click image for larger version

Name:	224484_478825032151842_1753725615_n.jpg
Views:	2633
Size:	68.8 KB
ID:	79140   Click image for larger version

Name:	374548_478825088818503_163832000_n.jpg
Views:	2599
Size:	73.7 KB
ID:	79141   Click image for larger version

Name:	523267_478825055485173_1136879566_n.jpg
Views:	2603
Size:	70.0 KB
ID:	79142   Click image for larger version

Name:	557568_478825242151821_1857714364_n.jpg
Views:	2642
Size:	64.6 KB
ID:	79143  
__________________
Rodney Stryker
Head Brewer | Heathen Brewing
Facebook
Twitter

My HERMS Stand Build
rbstryker is offline
 
Reply With Quote
Old 10-11-2012, 09:19 PM   #5
rbstryker
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Vancouver, Washington
Posts: 42
Liked 4 Times on 4 Posts
Likes Given: 11

Default

Quote:
Originally Posted by moboy View Post
Nice looking stand, how tall is it?

Matt
With the casters it stands about 36". Just enough to be able to look into the kettles.
__________________
Rodney Stryker
Head Brewer | Heathen Brewing
Facebook
Twitter

My HERMS Stand Build
rbstryker is offline
 
Reply With Quote
Old 10-11-2012, 09:21 PM   #6
Subsailor
Life is Tough, Stupid makes it Tougher
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Subsailor's Avatar
Recipes 
 
Join Date: Jun 2011
Location: Prescott Valley, Arizona
Posts: 1,206
Liked 522 Times on 335 Posts
Likes Given: 3713

Default

Very Nice!
__________________
SSBN 618 G
SSBN 641 B
SSBN 658 G
SSBN 641 B
Subsailor is offline
rbstryker Likes This 
Reply With Quote
Old 10-11-2012, 09:25 PM   #7
rbstryker
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Vancouver, Washington
Posts: 42
Liked 4 Times on 4 Posts
Likes Given: 11

Default Panel

Big thanks to mmurray for the schematic on his panel. I'm electrically challenged, so I reached to the forums for help. Decided to implement a timer and digital thermometer for the wort chiller on the panel as well.

I went through probably 15 panel designs, and finally decided to clean it up with lit switches. Main power (red), TCU Power (yellow), Solenoid Power (green), Pumps (white).

It's wired so that when the solenoids are open, the green lights will flip on as an indicator.

Rats nest in the picture is much cleaner now, don't worry. (Tags are in the mail, I'll post more of the "final pictures" when it's all done in about a week or so).
Click image for larger version

Name:	photo 1.jpg
Views:	2463
Size:	43.6 KB
ID:	79144   Click image for larger version

Name:	photo 2.jpg
Views:	2477
Size:	67.0 KB
ID:	79145   Click image for larger version

Name:	photo 3.jpg
Views:	2481
Size:	40.4 KB
ID:	79146  
__________________
Rodney Stryker
Head Brewer | Heathen Brewing
Facebook
Twitter

My HERMS Stand Build
rbstryker is offline
 
Reply With Quote
Old 10-11-2012, 09:31 PM   #8
rbstryker
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Vancouver, Washington
Posts: 42
Liked 4 Times on 4 Posts
Likes Given: 11

Default

Gas manifold in its entirety pulled off the panel. Standing pilot lights for the HLT and MLT on it's own valve for control. Looking back, we would have just T'd up from in between the two solenoid legs. Main reason we went with standing lights over an electric type, was just simplicity of design. The gas used during a batch is minimal, if not unnoticed.

Electrical manifold and conduit brought off as well. I do really like that I can pull just electrical off, or just gas off and make changes if needed, without pulling the entire stand apart to do so.
Click image for larger version

Name:	photo 1 (1).jpg
Views:	2450
Size:	64.0 KB
ID:	79148   Click image for larger version

Name:	photo 2 (1).jpg
Views:	2458
Size:	52.0 KB
ID:	79149   Click image for larger version

Name:	photo 5.jpg
Views:	2459
Size:	62.5 KB
ID:	79150  
__________________
Rodney Stryker
Head Brewer | Heathen Brewing
Facebook
Twitter

My HERMS Stand Build
rbstryker is offline
 
Reply With Quote
Old 10-11-2012, 09:33 PM   #9
rbstryker
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Vancouver, Washington
Posts: 42
Liked 4 Times on 4 Posts
Likes Given: 11

Default

Getting ready for paint!

Gas manifold got painted along with the naked stand. Then assembly!
Click image for larger version

Name:	photo 3 (1).jpg
Views:	2519
Size:	35.9 KB
ID:	79151   Click image for larger version

Name:	photo 4 (1).jpg
Views:	2471
Size:	52.7 KB
ID:	79152  
__________________
Rodney Stryker
Head Brewer | Heathen Brewing
Facebook
Twitter

My HERMS Stand Build
rbstryker is offline
 
Reply With Quote
Old 10-11-2012, 09:36 PM   #10
rbstryker
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Vancouver, Washington
Posts: 42
Liked 4 Times on 4 Posts
Likes Given: 11

Default More assembly

Assembling burners, electrical and gas manifolds.


Click image for larger version

Name:	68325_478825412151804_552802708_n.jpg
Views:	2472
Size:	50.4 KB
ID:	79153   Click image for larger version

Name:	227522_478825442151801_916506752_n.jpg
Views:	2455
Size:	60.1 KB
ID:	79154   Click image for larger version

Name:	224429_478825502151795_1815631018_n.jpg
Views:	2423
Size:	57.1 KB
ID:	79155   Click image for larger version

Name:	548210_478825568818455_86750002_n.jpg
Views:	2538
Size:	65.6 KB
ID:	79156  
__________________
Rodney Stryker
Head Brewer | Heathen Brewing
Facebook
Twitter

My HERMS Stand Build
rbstryker is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fish Tank Stand for Brew Stand aredling Brew Stands 4 02-26-2012 09:17 PM
Brew Stand build (Mini Brew Stand) Espi Brew Stands 20 05-07-2011 01:06 AM
Advice for making a stand to hold a Keggle AHammer16 Equipment/Sanitation 4 01-13-2009 03:13 AM
Scarlet Dragon - 6 Months in the Making DeathBrewer Extract Brewing 4 09-28-2007 06:45 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS