Messy Commercial Kegerator Drainage - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > General Beer Discussion > Messy Commercial Kegerator Drainage

Reply
 
Thread Tools
Old 10-10-2012, 11:53 PM   #1
ardyexfor
Recipes 
 
Apr 2010
Redmond, Oregon
Posts: 497
Liked 69 Times on 55 Posts



I have a Beverage Air DD94 5 keg capacity kegerator. It's freakin awesome, I know.

Love it all except for the drainage system, which is meant to be plumbed into a floor drain I assume. I don't waste much beer down the system but seem to get a build up of what appears to be water. I'm assuming from condensation...

I keep a wash clothe at the end of the drain system to collect excess water which is a pain. Usually though the lines just fill up because they sag downwards in the middle and get nasty and moldy... So I end up manually pushing the water through the hoses to get it to drain.

Anyone have any experience with owning a commercial kegerator and have a fix for this? I can't plum it so I need an alternative.

 
Reply With Quote
Old 10-10-2012, 11:54 PM   #2
ardyexfor
Recipes 
 
Apr 2010
Redmond, Oregon
Posts: 497
Liked 69 Times on 55 Posts


Pic:
Click image for larger version

Name:	Snapshot_20121010_1.JPG
Views:	364
Size:	110.3 KB
ID:	79043  

 
Reply With Quote
Old 10-11-2012, 12:15 AM   #3
indianaroller
Recipes 
 
Apr 2008
Posts: 196
Liked 4 Times on 4 Posts


I'm not sure if I follow 100% but I set a growler inside my unit and run the drain tubing into that.

 
Reply With Quote
Old 10-11-2012, 12:31 AM   #4
ardyexfor
Recipes 
 
Apr 2010
Redmond, Oregon
Posts: 497
Liked 69 Times on 55 Posts


all the drain tubing is contained internally in the walls of this unit being it is commercial grade. It all runs through the walls of the unit to the bottom of the doors where the drains externally join with hose tees with a common output at the end. Your idea would work well for the beer drains if they were accessible internally, but again most of what I am seeing appears to be condensation.

 
Reply With Quote
Old 10-11-2012, 12:36 AM   #5
ardyexfor
Recipes 
 
Apr 2010
Redmond, Oregon
Posts: 497
Liked 69 Times on 55 Posts


Sorry the lighting is not so great...
Click image for larger version

Name:	Snapshot_20121010.JPG
Views:	333
Size:	186.9 KB
ID:	79042  

 
Reply With Quote
Old 10-11-2012, 12:40 AM   #6
JRems
Recipes 
 
Nov 2010
Mahopac, NY
Posts: 2,221
Liked 61 Times on 52 Posts


Put new hoses on and run them all into a bucket. There should be three hoses. Two from the drip trays and one from under the internal fan.
__________________
Quote:
Originally Posted by Bobby_M View Post
Simcoe smells like 10 cats pissing on a pine tree. It's awesome.

 
Reply With Quote
Old 10-11-2012, 12:57 AM   #7
ardyexfor
Recipes 
 
Apr 2010
Redmond, Oregon
Posts: 497
Liked 69 Times on 55 Posts


There is a 4 inch exposed section of the hoses, but I am already running 6 taps in this thing. What a rats nest that would be. I guess my only possible solution though?

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
commercial to homebrew kegerator Spencecore24 Bottling/Kegging 1 02-14-2012 09:03 PM
Commercial kegerator suggestion TheCrane General Beer Discussion 3 08-08-2011 11:38 PM
Commercial Kegerator - What Questions to Ask Ell Beginners Beer Brewing Forum 11 03-25-2011 09:55 PM
What parts do I need for a commercial kegerator? Shonuff Bottling/Kegging 2 07-21-2008 05:01 PM
Are Kegerators Messy and Smelly/How to mitigate spilled beer from a kegerator? polamalu43 Bottling/Kegging 19 04-10-2008 01:39 AM


Forum Jump