Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Gravity Readings
Reply
 
Thread Tools
Old 10-10-2012, 02:44 PM   #1
Dlax006
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2012
Location: Fulton, NY
Posts: 20
Liked 1 Times on 1 Posts
Likes Given: 1

Default Gravity Readings

As a new brewer, I've done about two brews, but never really paid attention to gravity readings. I've just been trying to get the bare-bones of the process down to this point. Now, I'm ready to get more technical, and get better brewing results. My question is, at what point during the brewing process do I take an original gravity reading and final gravity reading? Are there other points during the process I should be taking readings also? Any advice is much appreciated! Thank you!


__________________
Brewing since 09/2012
Go Pack Go.
Dlax006 is offline
 
Reply With Quote
Old 10-10-2012, 02:48 PM   #2
unionrdr
struggling author
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
unionrdr's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Sheffield, Ohio
Posts: 35,133
Liked 3026 Times on 2607 Posts
Likes Given: 2142

Default

You take the OG reading after thoroughly mixing wort & top off water & aerating. But before pitching yeast. Then wait till the 2 week mark,& test again to see how close to FG you are. Some even wait 3 weeks to take an FG reading. When the numbers are the same 2 days apart,it's ready to package.


__________________
My sci-fi & home brewing books on amazon-kindle now! New additions coming!
NEW, REVISED EDITION of book one of Time Lords 2034 series now on Amazon Kindle! http://www.amazon.com/dp/B00NTA0L6G
My homebrewing book "Tippy Tippy Tappy" on Kindle! http://www.amazon.com/dp/B00PBAP6JO
unionrdr is offline
 
Reply With Quote
Old 10-10-2012, 02:49 PM   #3
twistr25
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
twistr25's Avatar
Recipes 
 
Join Date: May 2012
Location: Raleigh, NC
Posts: 1,424
Liked 117 Times on 110 Posts
Likes Given: 15

Default

In all honesty, taking gravity readings should have been apart of your initial process. But to answer your question, you can take an OG reading after your boil process and when it's cooled. You'll want to take it before pitching the yeast. For FG you'll want to wait a few weeks after pitching the yeast, take a reading between 14 and 21 days, wait two to three days and take another. If it remains constant, the beer is done.
__________________
____________________
Primary: N/A
Bottled: N/A
Kegs: Tri-Peppered Saison and Sunset Orange Kolsch
Future:Something new, SMaSH perhaps?
2013 Previous: Sunrise Honey Rye Pale Ale, Dark Skies Black IPA, Sunset Orange Kolsch, All Hallow's Eve Pumpkin Ale, Raining Hops and Dogs IPA

Awards/Recognition
Dark Skies Black IPA - 2nd Place at a local comp. Score of 39 from a BJCP judge

Twistr25 Recipes

GT Keezer Build
twistr25 is offline
 
Reply With Quote
Old 10-10-2012, 02:50 PM   #4
freisste
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: Ann Arbor, Michigan
Posts: 2,450
Liked 311 Times on 261 Posts

Default

I try to take readings as close to the temp my hydrometer is calibrated to as possible (60f). I am around that point after adding cold water to my cooled boil, so I take it then, right after pitching yeast. I mostly have been trying to hold that temperature for fermenting, so I take another reading when I think it is getting close to done fermenting or completely done. Then I check again after a few days to ensure it is stable and then bottle.

Feel free to check more to see how fermentation is progressing, but I don't think any more are necessary.

And it isn't a problem to check at temperatures other than where your hydrometer is calibrated, you just have to make an adjustment to your reading based on the temperature.
freisste is offline
 
Reply With Quote
Old 10-10-2012, 02:51 PM   #5
freisste
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: Ann Arbor, Michigan
Posts: 2,450
Liked 311 Times on 261 Posts

Default

Quote:
Originally Posted by unionrdr
You take the OG reading after thoroughly mixing wort & top off water & aerating. But before pitching yeast. Then wait till the 2 week mark,& test again to see how close to FG you are. Some even wait 3 weeks to take an FG reading. When the numbers are the same 2 days apart,it's ready to package.
Before pitching? Oops...

Is there a reason for that? Learn something new every day...
freisste is offline
 
Reply With Quote
Old 10-10-2012, 02:55 PM   #6
unionrdr
struggling author
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
unionrdr's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Sheffield, Ohio
Posts: 35,133
Liked 3026 Times on 2607 Posts
Likes Given: 2142

Default

Well,the yeast would ad to the gravity I think. It's also a good practice to do it before pitching,as most will pitch & seal it up straight away. Then remember later that they didn't take an OG reading.
__________________
My sci-fi & home brewing books on amazon-kindle now! New additions coming!
NEW, REVISED EDITION of book one of Time Lords 2034 series now on Amazon Kindle! http://www.amazon.com/dp/B00NTA0L6G
My homebrewing book "Tippy Tippy Tappy" on Kindle! http://www.amazon.com/dp/B00PBAP6JO
unionrdr is offline
 
Reply With Quote
Old 10-10-2012, 03:17 PM   #7
freisste
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: Ann Arbor, Michigan
Posts: 2,450
Liked 311 Times on 261 Posts

Default

Good call. I guess I figured that since the yeast will be in for final gravity measurements, I should do OG measurements with it present as well.

As far as practical measurements go, how critical is it to do it one way or the other? The only thing it will affect is the calculation of ABV, correct? Anyone have an idea how far off the ABV calc will be?

As long as one is consistent batch to batch, is it something to worry about?
freisste is offline
 
Reply With Quote
Old 10-10-2012, 03:21 PM   #8
JordanThomas
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2012
Location: Grand Rapids, Michigan
Posts: 889
Liked 83 Times on 77 Posts
Likes Given: 426

Default

I take a sample right before pitching yeast. Then I take a sample after about a week. Then another a day before bottling. This way I can compare the gravities after about a week (which for most beers is enough time to fully ferment) and after it's cleaned up. Knowing they are they same assures that the fermentation is complete and that you won't get bottle bombs!

Quote:
Originally Posted by freisste View Post
Good call. I guess I figured that since the yeast will be in for final gravity measurements, I should do OG measurements with it present as well.

As far as practical measurements go, how critical is it to do it one way or the other? The only thing it will affect is the calculation of ABV, correct? Anyone have an idea how far off the ABV calc will be?

As long as one is consistent batch to batch, is it something to worry about?
The ABV part of the scale should be ignored for beer purposes. But, if you did make note of where this was before your beer started fermenting, take out your hydrometer and look at the specific gravity that corresponds to that same level of "ABV." That would be your OG.
JordanThomas is offline
 
Reply With Quote
Old 10-10-2012, 03:23 PM   #9
unionrdr
struggling author
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
unionrdr's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Sheffield, Ohio
Posts: 35,133
Liked 3026 Times on 2607 Posts
Likes Given: 2142

Default

It's just excepted practice to get a more accurate OG reading before the pitch. Later on,while it is present,there's less sugar,having been converted to alcohol. Alcohol is lighter than the sugars,so the specific gravity reads lighter.
__________________
My sci-fi & home brewing books on amazon-kindle now! New additions coming!
NEW, REVISED EDITION of book one of Time Lords 2034 series now on Amazon Kindle! http://www.amazon.com/dp/B00NTA0L6G
My homebrewing book "Tippy Tippy Tappy" on Kindle! http://www.amazon.com/dp/B00PBAP6JO
unionrdr is offline
 
Reply With Quote
Old 10-10-2012, 04:16 PM   #10
freisste
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: Ann Arbor, Michigan
Posts: 2,450
Liked 311 Times on 261 Posts

Default

Thanks.

I guess what I am trying to ask is this. Since I use my hydrometer primarily to ensure I have a steady FG, pre- or post-pitch doesn't matter, correct?

Where it does matter is in the CALCULATION of ABV (based on OG-FG), correct? (JordanThomas, I think you misunderstood because I am only reading gravitates, not ABV directly.)

I guess what I am really wondering is how do I get the most accurate numbers for my ABV calculation? What complicates this is that the amount of yeast in suspension changes as the beer ferments.

Maybe I should ask this: when fermentation is complete, how much yeast is in suspension and how does this compare to the values of yeast in suspension pre- and post-pitch (ie. 250M cells and end of fermentation is closer to zero than to 1B cells at pitch, so pre-pitch is more accurate)? Have I taken this too far? Thanks again, everybody. Sorry if I have hijacked the thread.


freisste is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gravity readings MadMarty911 Beginners Beer Brewing Forum 7 02-11-2014 04:40 AM
gravity readings beezee619 Beginners Beer Brewing Forum 2 07-28-2012 01:13 PM
Gravity readings always off mikeljcarr Beginners Beer Brewing Forum 11 05-07-2012 01:14 PM
Gravity Readings nstorm1121 Beginners Beer Brewing Forum 4 12-16-2010 03:17 AM
Gravity readings don't add up CmdrTrekk Beginners Beer Brewing Forum 14 08-09-2010 10:07 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS