Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Starting a HERMS build
Reply
 
Thread Tools
Old 10-09-2012, 06:11 PM   #1
Frothy3001
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2012
Location: waterloo, ontario
Posts: 34
Likes Given: 1

Default Starting a HERMS build

Hi Fellow brewers. Im about to start my first HERMS build. It will be a single tier. I need to buy a pump. Is there a march pump that is better than others, i see march pumps with different codes behind it, which one is best to buy. Also I allready own a 20 gallon blichmann brewpot, 15.5 gallon keg and a 13.2 gallon keg. I have a false floor for my brew pot so i was going to use it for the mash tun. I was thinking of converting the 13.2 gallon into a HLT and using the 15.5 gallon as a brew pot. Would this setup be the best way to do a HERMS? Im using gas for heat as well. Thanks for the advice in advance.
Frothy3001 is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
HLT Herms Build Jdaught Equipment/Sanitation 7 08-05-2013 01:42 PM
Scuba's Herms Build! ScubaSteve Equipment/Sanitation 125 06-02-2013 11:03 PM
Another (mostly) stainless HERMS build! patrck17 Equipment/Sanitation 27 02-07-2011 06:59 PM
Why not build a HERMS like this? Islandboy85 Equipment/Sanitation 30 09-16-2010 02:23 AM
Where might one buy or build a HERMS? Thor Equipment/Sanitation 18 01-22-2006 04:47 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS