Keg Connection New Inline Flow Control Valve Giveaway

Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Bar build issue?
Thread Tools
Old 10-07-2012, 07:38 PM   #1
Feedback Score: 0 reviews
Join Date: Nov 2009
Location: Long Island, State of Confusion
Posts: 676
Liked 97 Times on 69 Posts
Likes Given: 15

Default Bar build issue?

I need some ideas on my bar build.
I have a 2'deep 5'wide area recessed in a wall were the kegerator will be.(took out the china hutch for a bar.whats cooler than that!)Anyway,The kegerator will be completely enclosed except for the door so I can roll it out if necessary.(under the counter type fridge).Im using hardwood flooring for the counter top with the tower mounted to the top of the counter top.

My question is ... Will I have an issue rolling out the fridge with the lines going into the fridge through a permanently mounted counter top over it?
If that makes any sense

JONNYROTTEN is offline
Reply With Quote
Old 10-07-2012, 09:04 PM   #2
Feedback Score: 0 reviews
Join Date: Sep 2012
Location: Ft. Collins, CO
Posts: 12

If the lines are long enough to give you some slack, you can probably roll it out a little. But it sounds like you will have to disconnect the lines and pull them out the top of the refrigerator before moving it.
Feeny is offline
Reply With Quote
Old 10-08-2012, 04:24 PM   #3
Feedback Score: 1 reviews
Join Date: Jan 2010
Location: Des Moines, Iowa
Posts: 1,429
Liked 20 Times on 19 Posts
Likes Given: 4


I had a similar issue with my bar build several years ago - I was using a chest freezer under the bar that had to be slid out to access.
My solution was here:
Originally Posted by Ecnerwal View Post
What does the primary pressure gauge on the tank tell us? That's right, the temperature. Put it on a scale if you want to know how much is in it...
Put some duct tape over the gauge - Or better yet - Replace the high pressure gauge with a plug - High pressure gauges are useless!
SweetSounds is offline
Reply With Quote

Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Build Issue - Help Troubleshoot jschnyderite Kegerators and Keezers 1 06-05-2012 08:33 PM
Ice Cream Cooler build or not to build. natebomb Kegerators and Keezers 7 10-16-2011 06:54 PM
Schematic Issue Bruwsomtin Brew Stands 10 02-24-2011 12:49 AM
made some progress on my bar build/ keezer build 802VermontHomebrew Kegerators and Keezers 17 08-22-2010 01:20 PM
To build or not to build, that is the question.. CodyBoyBrewery Fermenters 4 08-10-2010 03:33 PM

Forum Jump

Newest Threads