Building a Kegerator, I could use a parts review! - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Building a Kegerator, I could use a parts review!

Thread Tools
Old 10-05-2012, 09:40 PM   #1
Jul 2012
New York, NY
Posts: 87

Hello everyone, I am building a 4 tap kegerator (3 regular, 1 nitro) and I recently did some pricing. It would be great if someone could look over my parts and tell me if I am missing anything important. Here is what I plan on picking up:

4 Ball Lock Kegs
2 Way Regulator
2 Way Distributor 1/4'' Barbs
4x Ball Lock Disconnect Package
10lb CO2 Tank
3x Perlick 525
Stout faucet (I am still thinking about this one, I don't know if it matters if I get the stainless micromatic or a chrome plated one)
Nitro Tank (28 cu ft)
Nitrogen Regulator (can I just use a CO2 one and save money?)
20ft 5/16'' gas line
40ft beer 3/16'' line

Does anyone see any issues with this setup? Also what do people think about Taprite regulators vs the cheaper brand that keg connection sells (here saves me $40). Do you think 3 kegs with a dual regulator (with one serving 2 kegs) will give me enough serving pressure options?

Thanks so much for the help!

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Building my first keezer, need parts. mringo17 Bottling/Kegging 37 12-28-2012 04:16 PM
Building Keezer - Keg Parts Question doctorRobert Bottling/Kegging 1 04-07-2011 07:25 PM
Kegerator Parts List aryiman Bottling/Kegging 16 10-24-2008 03:24 PM
final parts for my kegerator 2nd Street Brewery Bottling/Kegging 1 03-31-2006 12:17 PM

Forum Jump