Keezer Love Temp Controller Error - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Keezer Love Temp Controller Error

Thread Tools
Old 10-05-2012, 01:05 PM   #1
Jun 2012
Louisville, KY
Posts: 2


I followed Quaffer's keezer build (will post pics soon) and I am at the final stages. Have everything wired up according to wiring diagram and everything seems fine, but I am getting an ep2 error on the controller. Have any ideas? I have the same controller Quaffer has, the TSX 10140.

Some things I maybe don't understand: It's giving me a temp reading, but am I supposed to calibrate the thermistor in anyway? Also should the r1 parameter be set to the same value as SP?

I have the thermistor wires in the 1 and 2 inputs on the controller. They are not labelled so I'm assuming it doesn't matter which wire goes into which input.

Any help would be appreciated!!

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help with Love digital controller error :( Vwchris Equipment/Sanitation 13 05-13-2011 08:01 AM
Love Temp Controller/Calibration SugarJohnson Equipment/Sanitation 3 11-30-2009 09:15 PM
Love Temp Controller Probe doggage Equipment/Sanitation 3 08-23-2009 03:18 PM
Love Temp Controller Question STAD Equipment/Sanitation 10 10-02-2008 10:52 PM
Love 2 Stage Temp controller rcrabb22 Equipment/Sanitation 1 09-20-2008 04:28 AM

Forum Jump