Dry hop transfer fkup - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > General Beer Discussion > Dry hop transfer fkup

Thread Tools
Old 10-04-2012, 06:39 PM   #1
Feb 2011
Columbus, OH
Posts: 349
Liked 7 Times on 7 Posts

Seems I transferred quite a bit of dry hop turn into my keg. So much that it clogged my dip tube. I racked it to another keg, but can't get the last gallon or so thru my siphon. Any ideas on how to save this beer?
"What do you use to weigh down your hop spider?"


Reply With Quote
Old 10-04-2012, 06:48 PM   #2
terrapinj's Avatar
Dec 2010
Santa Monica, CA
Posts: 2,415
Liked 170 Times on 126 Posts

you can try switching the posts and push co2 through the liquid diptube to see if it will clear out the blockage or remove the liquid post and diptube and clean it out manually, sanitize and put back on. if you can place a screen or mesh bag etc over the end it should help you avoid more debris

Reply With Quote
Old 10-04-2012, 06:50 PM   #3
Heavyweight homebrewing author & air gun shooter
unionrdr's Avatar
Feb 2011
Sheffield, Ohio
Posts: 38,990
Liked 3712 Times on 3184 Posts

Here's a thought;how about putting a hop sack over the end of the dip tube when transfering to another keg? The same way folks tie a hop sack over their siphon tube when racking?
NEW books on amazon/Kindle! Check it out now...
Home Brewing- https://www.amazon.com/dp/B00PBAP6JO
Distopian Sci-Fi- https://www.amazon.com/dp/B00NTA0L6G
New! John Henry- https://www.amazon.com/dp/B01GBV3UXU

Reply With Quote
Thread Tools

Forum Jump