Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Brew Science > My Ward Labs Report: What Does It Mean?
Reply
 
Thread Tools
Old 10-03-2012, 10:09 PM   #1
29thfloor
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Pt. Pleasant, PA
Posts: 270
Liked 8 Times on 7 Posts
Likes Given: 3

Default My Ward Labs Report: What Does It Mean?

Just got the results from my Ward Labs water report. I'm not sure what I'm looking for but based on some other threads I've read it sounds like maybe alkalinity is pretty high (116)?

Would you brew with this water? I've used it for yeast starters and in brews with about a 3:1 ratio of bottled(spring):tap but never a full batch.

7.5 pH
303 Total Dissolved Solids (TDS) Est, ppm
0.50 Electrical Conductivity, mmho/cm
4.8 / 4.9 Cations / Anions, me/L

25 Sodium, Na
7 Potassium, K
58 Calcium, Ca
8 Magnesium, Mg
178 Total Hardness, CaCO3
1.4 (SAFE) Nitrate, NO3-N
9 Sulfate, SO4-S
68 Chloride, Cl
< 1 Carbonate, CO3
141 Bicarbonate, HCO3
116 Total Alkalinity, CaCO3
0.32 Total Phosphorus, P
< 0.01 Total Iron, Fe


__________________
29thfloor.com/blog
Twitter | Facebook | 29thfloor on Instagram
Primary: Dunkelweizen, Sour Brown Ale
Secondary:
Kegged: Nothing :(
Bottled: Blonde Lambic (Aug 2012), Berliner Weisse, Oaked Tripel Brett, Dawson's Kriek, Sweet Mead
29thfloor is offline
 
Reply With Quote
Old 10-03-2012, 11:08 PM   #2
ajdelange
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: McLean/Ogden, Virginia/Quebec
Posts: 7,757
Liked 1032 Times on 817 Posts
Likes Given: 32

Default

Your alkalinity is a little high but not unmanageably so. Lots of guys have brewed lots of beer with water worse than this. There are certainly things that can be done to improve the beer you can make with this water and number one on this list is mitigating the alkalinity which you can do by various methods the simplest of which is dilution with low ion content water. See the Primer in the Stickies.


ajdelange is offline
 
Reply With Quote
Old 10-04-2012, 05:02 PM   #3
29thfloor
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Pt. Pleasant, PA
Posts: 270
Liked 8 Times on 7 Posts
Likes Given: 3

Default

Awesome thanks! I'll check that out.
__________________
29thfloor.com/blog
Twitter | Facebook | 29thfloor on Instagram
Primary: Dunkelweizen, Sour Brown Ale
Secondary:
Kegged: Nothing :(
Bottled: Blonde Lambic (Aug 2012), Berliner Weisse, Oaked Tripel Brett, Dawson's Kriek, Sweet Mead
29thfloor is offline
 
Reply With Quote
Old 10-04-2012, 05:11 PM   #4
29thfloor
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Pt. Pleasant, PA
Posts: 270
Liked 8 Times on 7 Posts
Likes Given: 3

Default

Ok I'm not sure what I'm looking for in that sticky.

Are you saying I should dilute my water with water produced by the method outlined in the primer? How do I get an idea of what the ratio should be? I don't see anything in there about low ion content or how to dilute or anything like that.
__________________
29thfloor.com/blog
Twitter | Facebook | 29thfloor on Instagram
Primary: Dunkelweizen, Sour Brown Ale
Secondary:
Kegged: Nothing :(
Bottled: Blonde Lambic (Aug 2012), Berliner Weisse, Oaked Tripel Brett, Dawson's Kriek, Sweet Mead
29thfloor is offline
 
Reply With Quote
Old 10-04-2012, 06:55 PM   #5
mabrungard
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
mabrungard's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Carmel, IN
Posts: 3,350
Liked 340 Times on 284 Posts
Likes Given: 30

Default

This water is similar to the water I used to deal with in Tallahassee. The alkalinity is not too extreme and could be neutralized easily with acid. Dilution with RO or distilled is another option. Bru'n Water provides the tools for figuring out what sort of acid addition or dilution a brewer might consider for each brew.
__________________
Martin B
Carmel, IN
BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://sites.google.com/site/brunwater/

Like Bru'n Water on Facebook for occasional discussions on brewing water and Bru'n Water
https://www.facebook.com/pages/Brun-...?ref=bookmarks
mabrungard is offline
 
Reply With Quote
Old 10-04-2012, 10:38 PM   #6
ajdelange
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: McLean/Ogden, Virginia/Quebec
Posts: 7,757
Liked 1032 Times on 817 Posts
Likes Given: 32

Default

The Primer gives guidance on what to add to 'soft' water to get started in water treatment. Soft water is defined as having alkalinity less than 35 and everything else less than 20. As the Primer says if you dilute with RO or DI water 1:1 everyhing gets cut in half. If you dilute 2:1, everything is reduces to 33%. If you dilute 3:1 everything goes to 25%. Your alkalinity is 116. A quarter of that is 29 which is under 30 so a 3:1 dilution is what you would need to qualify your diluted water as soft and thus suitable for the Primer's treatment recommendations.


ajdelange is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ward Labs Report makomachine Brew Science 4 08-02-2012 03:17 PM
My Water Report from Ward Labs jakecpunut Brew Science 8 11-08-2011 09:24 PM
Just got my water report from Ward Labs..... Now what? SamuraiSquirrel Brew Science 15 05-23-2011 04:18 AM
ward labs report mike79 Brew Science 1 05-04-2011 08:43 PM
My water report from Ward Labs...what does it all mean? Jkane101 Brew Science 8 09-08-2009 06:28 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS