Kegerator Gift - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Kegerator Gift

Thread Tools
Old 10-02-2012, 01:54 AM   #1
Feb 2012
Birmingham, Michigan
Posts: 63
Liked 1 Times on 1 Posts

Hello all!

I was planning on making myself a kegerator from my Sanyo mini fridge, but was just given a new kegerator for a wedding gift! The problem is that this kegerator only has a single tap tower. In the end I'd like to be able to tap into both my corny kegs at once. I've never had (or used) a kegerator before and apparently the "normal" size towers are 3.0" or 3.5". The one that I have is only 2.5" in diameter. Do any of you know if it would be possible to drill into the current tower or should I just go with something like this? Would that even fit? If I do drill, do you think that this might fit?

This is the kegerator I received:

Reply With Quote
Old 10-02-2012, 02:04 AM   #2
TrainSafe's Avatar
Mar 2011
Appleton, WI
Posts: 808
Liked 70 Times on 47 Posts

It might be possible to drill your current tower. If so, you'd need to put the second faucet lower than the first one. They won't fit at the same level.

The two faucet tower you linked to will fit fine. You may need to drill the small holes for screwing it down to the fridge, as they'll be slightly different. Not a big deal at all. I'd say installing that tower on your kegerator is a 15 minute job.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
A great birthday gift-----kegerator Beer-lord Bottling/Kegging 8 05-27-2012 09:07 PM
cheap gift bottles jcobbs Bottling/Kegging 9 03-05-2010 03:14 PM
My gift cert to scrambledegg81 Bottling/Kegging 4 12-05-2009 07:00 PM
instruction label for bottles given as gift vmpolesov Bottling/Kegging 8 01-08-2008 07:28 PM
Great Christmas Gift shafferpilot Bottling/Kegging 5 12-27-2007 10:18 PM

Forum Jump