Yeast - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Yeast

Thread Tools
Old 10-02-2012, 01:29 AM   #1
Jul 2012
Posts: 45
Liked 1 Times on 1 Posts

Ok... I decanted the starter a few hours ago and have been sitting at room temp. What's the best way to get it from the flask to the wort??? Seems the sludge may take forever to travel down the flask.

Reply With Quote
Old 10-02-2012, 01:36 AM   #2
Mar 2012
Knightdale, NC
Posts: 674
Liked 40 Times on 38 Posts

Try to leave a small amount of starter wort in the flask when decanting. Then you can swirl it into the starter to make it thinner. This makes the yeast slurry a little thinner and easier to pour. If the yeast is too thick, then add a half cup or so of wort to the starter to thin out the yeast prior to pitching.
"Give a man a beer, and he will waste an hour. Teach a man to brew, and he will waste a lifetime!" Bill Owen

Reply With Quote
Thread Tools

Forum Jump