What type of pin lock do I have? - Page 2 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > What type of pin lock do I have?

Thread Tools
Old 10-01-2012, 07:09 PM   #11
Nov 2010
Annandale, VA
Posts: 42
Liked 1 Times on 1 Posts

Originally Posted by acidrain View Post
A leak on the high-pressure side of the reg is almost impossible to find with soapy water (it blows away the soapy water with no sign of bubbles).
To find those, you'll need to submerge the tank up to just the edge of the gauge.
Keep looking, it's there somewhere.
I assume submerging the regulator itself is bad for it's longevity

So, connect the tank to the regulator, pressurize, and put the tank into the water as well as the line (all the way up to the regulator connector) and hope that I see something?

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Vertical height difference of connetcted ball lock vs pin lock keg?? duganderson Bottling/Kegging 2 11-29-2011 12:07 AM
Pin Lock to Ball Lock "R" type deathtomacro Bottling/Kegging 0 11-10-2011 05:28 PM
CorneyKeg.com Aluminum Pin Lock to Ball Lock Conversions? EFaden Bottling/Kegging 4 04-04-2011 07:15 PM
Can D type connection be changed to ball lock? Negativefx7 Bottling/Kegging 2 03-22-2011 02:42 AM
Pin lock to Ball lock - changing posts, potential problems? BaldManBrew Bottling/Kegging 4 03-09-2011 02:38 AM

Forum Jump