Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns, & Hot Liquor Tanks > recirculation issues........
Reply
 
Thread Tools
Old 10-10-2012, 01:39 AM   #11
biggubba
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Wausaukee, Wisconsin
Posts: 27
Default

Made two 10 gallon batches this past weekend, added rice hulls, adjust water to grain ratio and re ordered the sequence for the start of the recirculation. Worked like a dream...... thanks for your help.


biggubba is offline
 
Reply With Quote
Old 10-10-2012, 01:00 PM   #12
jcaudill
Feedback Score: 3 reviews
Recipes 
 
Join Date: Dec 2010
Location: VA Beach, VA
Posts: 864
Liked 64 Times on 49 Posts
Likes Given: 6

Default

Nobody mentioned mill gap - so I will You may be milling too fine. Recommended gap is 1.5-1.7mm. At this gap you should be left with some barley husks to aid in filtering. You need to be careful not to adjust the water/grist ratio too high.
jcaudill is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Recirculation question Brew-ta-sauraus Brew Stands 5 02-28-2012 10:05 PM
Rubbermaid MLT recirculation port? High_Noonan Kettles, Mash Tuns, & Hot Liquor Tanks 3 08-17-2011 11:15 PM
Need some help with recirculation setup HossTheGreat Brew Stands 7 08-15-2011 10:03 PM
Bulkhead fitting recirculation port brewnami Kettles, Mash Tuns, & Hot Liquor Tanks 6 05-23-2011 01:34 PM
HERMS recirculation kingoslo Brew Stands 11 10-15-2009 06:03 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS