PM to AG - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Recipes/Ingredients > PM to AG

Reply
 
Thread Tools
Old 09-23-2012, 05:33 AM   #1
mforsman
HBT_SUPPORTER.png
 
mforsman's Avatar
Recipes 
 
Feb 2011
Astoria, NY
Posts: 244
Liked 14 Times on 12 Posts



While I'll probably just do this as a PM to keep the flavors I've been getting (which is GREAT and many people have told me to always have this on tap).

I just upgraded to all grain (3 batches ago) and what to hone and increase my efficiency.

Should i just take the US 2-row and bump it from 1.5lbs to 8.88? (That is the LME x 1.23)

Fermentables
Ingredient Amount % MCU When
US 2-Row Malt 1.50 lb 17.6 % 0.5 In Mash/Steeped
US Caramel 10L Malt 0.50 lb 5.9 % 1.0 In Mash/Steeped
US Caramel 20L Malt 0.50 lb 5.9 % 1.9 In Mash/Steeped
Extract - Golden Light Liquid Extract 6.00 lb 70.6 % 4.6 Start Of Boil


Hops
Variety Alpha Amount IBU Form When
Sorachi Ace 15.1 % 0.85 oz 38.4 Loose Whole Hops All Of Boil
Sorachi Ace 15.1 % 1.00 oz 34.7 Loose Whole Hops 30 Min From End
US Cascade 6.8 % 1.00 oz 1.0 Loose Pellet Hops 1 Min From End
__________________
Homebrew Site: forsmanbrewing.com

 
Reply With Quote
Old 09-23-2012, 05:43 AM   #2
lumpher
Recipes 
 
Jul 2009
texas
Posts: 5,065
Liked 265 Times on 226 Posts


yep. make it a nice round 9 lbs for easy figuring, and it should be a tasty apa
__________________
There is no "i" in denial.

 
Reply With Quote
Old 09-23-2012, 05:01 PM   #3
mforsman
HBT_SUPPORTER.png
 
mforsman's Avatar
Recipes 
 
Feb 2011
Astoria, NY
Posts: 244
Liked 14 Times on 12 Posts


Great thanks! Going to make the 2.5 hour trek to the brew store now.
__________________
Homebrew Site: forsmanbrewing.com

 
Reply With Quote
Old 09-23-2012, 05:14 PM   #4
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,420
Liked 7845 Times on 5497 Posts


Quote:
Originally Posted by mforsman View Post
Great thanks! Going to make the 2.5 hour trek to the brew store now.
Well, let us know how it comes out! It's always fun to make an AG batch from the "same" recipe you did as an extract or PM and to see if you can notice any differences.

The only differences I noticed in some of my favorites were less of a "extract" taste, if that makes sense. In comparison, the extract batch seemed a little thicker with more of a malt syrup flavor. Otherwise, I didn't notice much difference in some of the beers.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 09-24-2012, 01:27 AM   #5
billl
Recipes 
 
May 2012
Raleigh, NC
Posts: 2,258
Liked 363 Times on 304 Posts


Most extract has carapils. when you sub out 2-row for them, you typically get a lighter feeling beer. For an APA, that could be a good thing.

 
Reply With Quote
Old 09-24-2012, 03:20 AM   #6
mforsman
HBT_SUPPORTER.png
 
mforsman's Avatar
Recipes 
 
Feb 2011
Astoria, NY
Posts: 244
Liked 14 Times on 12 Posts


So for a beer that im converting from PM to AG that has a bit more body I should use some carapils?

Thanks everyone.
__________________
Homebrew Site: forsmanbrewing.com

 
Reply With Quote
Old 09-24-2012, 01:29 PM   #7
billl
Recipes 
 
May 2012
Raleigh, NC
Posts: 2,258
Liked 363 Times on 304 Posts


Carapils adds body, but it isn't the only way to accomplish that. It is usually used in lighter beers where you want to fill them out a little without adding flavor, sweetness or color.

 
Reply With Quote
Reply
Thread Tools



Forum Jump