Still plagued by "THT"... "The Homebrew Taste" - Page 2 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Still plagued by "THT"... "The Homebrew Taste"

Reply
 
Thread Tools
Old 09-19-2012, 09:04 PM   #11
Brewskier
Recipes 
 
Aug 2011
So Cal, CA
Posts: 68
Liked 1 Times on 1 Posts


Quote:
Originally Posted by cooper View Post
Another thing to think about is when was the last time you changed out all of your tubing? I like to change mine out at least every six months, more if I'm doing more batches. They get hot and cold and expand and contract and after a while, the Starsan just doesn't work on them like they used to and you end up with something wrong with your beer and you just can't quite nail it down. I'd change my tubing and brew another batch and see what happens.

Also, use RO/Distilled water instead of spring water and if you're steeping grains, don't go above 2 gallons of steeping water, depending on how many lbs of steeping grains you have.. don't want a PH spike from not enough grains. Once you add your LME/DME then you can top up to 5 gallons and start your boil. I apologize if any of this is terribly obvious to you. Just trying to help out.
I've tried RO/Distilled before, and I don't remember a homebrew taste occurring, but that could be because of something else. I don't see why mountain spring water could cause these flavors, but they might somehow. Thanks for the advice.

 
Reply With Quote
Old 09-19-2012, 09:08 PM   #12
cooper
Recipes 
 
Dec 2009
OFallon, IL
Posts: 469
Liked 28 Times on 25 Posts


Sometimes with mountain or spring water they add in extra minerals that the body needs. Most of the time these dont affect extract batches because the wort has already been made/mashed and all you're doing is rehydrating. You dont have to worry about how the water will affect the mash when using extract, but it's worth a shot to try it if everything else seems to not be working.

 
Reply With Quote
Old 09-19-2012, 09:10 PM   #13
Brewskier
Recipes 
 
Aug 2011
So Cal, CA
Posts: 68
Liked 1 Times on 1 Posts


Quote:
Originally Posted by cooper View Post
Sometimes with mountain or spring water they add in extra minerals that the body needs. Most of the time these dont affect extract batches because the wort has already been made/mashed and all you're doing is rehydrating. You dont have to worry about how the water will affect the mash when using extract, but it's worth a shot to try it if everything else seems to not be working.
Thing is, I can't go straight RO/distilled now because I'm partial mashing. I need minerals for the mash now. I suppose I can get RO and then build my own water profile, but that's the kind of thing that made me abandon all grain in the first place.

 
Reply With Quote
Old 09-19-2012, 09:16 PM   #14
Brewskier
Recipes 
 
Aug 2011
So Cal, CA
Posts: 68
Liked 1 Times on 1 Posts


Sorry for the confusion.... I actually forgot that I had two usernames. I'd like to keep "Brewskier" and get rid of "Stein", if possible. How do I do this?

 
Reply With Quote
Old 09-19-2012, 09:17 PM   #15
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,763
Liked 8031 Times on 5610 Posts


Quote:
Originally Posted by Brewskier View Post
Thing is, I can't go straight RO/distilled now because I'm partial mashing. I need minerals for the mash now. I suppose I can get RO and then build my own water profile, but that's the kind of thing that made me abandon all grain in the first place.
No, you don't. You can use RO water.

If you feel that you absolutely must add something (and you don't) you can add 1 teaspoon calcium chloride per 5 gallons of brewing water in the mash. If you have a 2.5 gallon mash, that's only 1/2 teaspoon of calcium chloride.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 09-19-2012, 09:18 PM   #16
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,763
Liked 8031 Times on 5610 Posts


Quote:
Originally Posted by Brewskier View Post
Sorry for the confusion.... I actually forgot that I had two usernames. I'd like to keep "Brewskier" and get rid of "Stein", if possible. How do I do this?
Can you send a PM to TxBrew? He's the admin, and he's the one that could combine/change that for you!
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 09-19-2012, 09:18 PM   #17
cooper
Recipes 
 
Dec 2009
OFallon, IL
Posts: 469
Liked 28 Times on 25 Posts


Have you check out AJ's primer? His advice is 1tsp Calcium Chloride per 5 gallons of RO water and either some phosphoric acid or 2% of the grain bill as acidmalt. Very easy and you can do a couple of easy batches and tweak it from there. I'd not worry about Gypsum at all until I tasted it and really thought it would help. Do you have any way to test your PH during the mash?

 
Reply With Quote
Old 09-19-2012, 09:47 PM   #18
iambeer
Recipes 
 
May 2012
Wash, DC
Posts: 1,236
Liked 161 Times on 124 Posts


+1 to aerating/oxygenating your wort before pitching. Yeast without oxygen will get stressed out.

 
Reply With Quote
Old 09-19-2012, 10:12 PM   #19
Brewskier
Recipes 
 
Aug 2011
So Cal, CA
Posts: 68
Liked 1 Times on 1 Posts


Quote:
Originally Posted by iambeer View Post
+1 to aerating/oxygenating your wort before pitching. Yeast without oxygen will get stressed out.
I was never sure how much O2 to give it.... It was usually 45 seconds worth.... is that enough? My friend gets good beer just by transferring the wort from the stock pot to the better bottle through a stainless steel strainer.

 
Reply With Quote
Old 09-19-2012, 10:59 PM   #20
iambeer
Recipes 
 
May 2012
Wash, DC
Posts: 1,236
Liked 161 Times on 124 Posts


Quote:
Originally Posted by Brewskier View Post
I was never sure how much O2 to give it.... It was usually 45 seconds worth.... is that enough? My friend gets good beer just by transferring the wort from the stock pot to the better bottle through a stainless steel strainer.
With pure O2, 2 minutes. If shaking it, you can do it for 15-25 minutes. According to the folks at White Labs.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Beer Smith Software - Hops "Boil" or "Aroma"? FensterBos Beginners Beer Brewing Forum 2 07-02-2011 05:13 PM
"Hello, World," or "Did I Ruin My Brew Already" dwint Beginners Beer Brewing Forum 17 09-21-2010 03:48 AM
"bavarian style" or "blonde" characteristic questions HasstheBoss Beginners Beer Brewing Forum 2 04-14-2010 10:44 PM
"Homebrew" taste brewer1222 Beginners Beer Brewing Forum 20 10-04-2009 10:36 PM
First Batch - Is this "normal" or "contamination"? Red Clay Beginners Beer Brewing Forum 7 08-26-2007 02:11 PM


Forum Jump