Tapping my tap-a-draft - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Tapping my tap-a-draft
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 09-17-2012, 11:30 PM   #1
Brewmaster_CPA
Recipes 
 
Jul 2012
Posts: 18
Liked 2 Times on 2 Posts



I used my TAD system for the first time the other day and came across a small problem. I unscrewed the cap on the bottle and the pressure released like a soda bottle, but 10x worse, and it was foaming like crazy. I eventually got the tap on and it seems be going decently. I was wondering if I did this the right way or should I have done it differently. Also, the beer seems to come out kind of slow, especially in comparison to my experience with the miller home draft. Any thoughts and/or help is greatly appreciated. Cheers!



 
Reply With Quote
Old 09-18-2012, 07:24 PM   #2
Hitokiri
Recipes 
 
Jun 2011
Seattle, WA
Posts: 64
Liked 3 Times on 3 Posts


My guess would be that you opened the TAD bottle while the beer was at room temp. Try sticking the bottle in the fridge for 24 hours first, and I would think that should help.

 
Reply With Quote
Reply
Thread Tools



Forum Jump