Ranco and 1-Wire? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Fermenters > Ranco and 1-Wire?

Reply
 
Thread Tools
Old 09-14-2012, 09:14 PM   #1
LeftTurnOnly
Recipes 
 
Nov 2009
, Iowa
Posts: 34
Liked 4 Times on 4 Posts



Hey gang... pardon me if this is a stupid question, but is the temp sensor probe from a Ranco controller compatible with 1-Wire by chance? (DS18B20) And if it's not, could you replace the probe with one that had a DS18B20 in it so it would still work as before plus now have the ability to be wired to a 1-Wire adapter?

Maybe they don't work like that.... Just curious if i could use my existing Ranco for control, but read from it remotely in some fashion...

Thanks....
Kyle....

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Which wire goes where? de5m0mike Chillers & Stir Plates 17 01-06-2012 02:34 AM
Wire This Up SpottedDogBrewing Brew Stands 22 05-05-2011 05:58 PM
Wire guage for Ranco ETC111000-000 rhltechie Fermenters 2 09-07-2009 03:22 AM
How to wire a PID and SSR for E-kettle/HLT Orangevango Kettles, Mash Tuns & Hot Liquor Tanks 3 08-10-2009 12:00 AM
Wiring a Ranco Ranco ETC-111000 McKBrew Brew Stands 1 02-18-2009 07:09 PM


Forum Jump