PERLICK 525 PARTS! Upgrade your old faucet - Home Brew Forums

Register Now!
Home Brew Forums > Sponsor Showcase > Sponsor Showcase > PERLICK 525 PARTS! Upgrade your old faucet

Reply
 
Thread Tools
Old 08-25-2012, 02:35 PM   #1
KegconnectionLLC
Sponsor
HBT_SPONSOR.png
 
KegconnectionLLC's Avatar
Recipes 
 
May 2009
Comanche, Texas
Posts: 659
Liked 75 Times on 47 Posts



We now carry the full line of parts for Perlick 525 Faucets. If you have one of the older faucets there are two parts that will greatly enhance it's performance. In many of the 525 faucets they came with a plastic bearing cup. We now have metal ones as replacements. Also, until fairly recently Perlick the faucet lever was rounded where it fit into the bearing cup. If you replace the faucet lever and the bearing cup with the new style it will lock the faucet lever into place and eliminate many of the issues people were having with the faucet handles turning. It also helps with issues some have had when using the larger, heavier handles. The bearing cup in part #6 below and the faucet lever is part #5 below. It is important that you replace both unless you already have the newer style of one of the parts.

If you have any questions concerning repairing or upgrading Perlick Faucets please feel free to ask them on this thread and I will do my best to answer your questions!

Here is a link to these parts on our website:
http://stores.kegconnection.com/Detail.bok?no=702
Click image for larger version

Name:	525ssREBUILD.jpg
Views:	1412
Size:	30.0 KB
ID:	73087  

 
Reply With Quote
Old 08-29-2012, 04:25 PM   #2
rossi46
Senior Member
HBT_SUPPORTER.png
 
rossi46's Avatar
Recipes 
 
Jan 2011
Pasco, WA
Posts: 863
Liked 76 Times on 58 Posts


without taking my faucet apart, how can I tell if I have an "older" one ? I got mine from you about March of 2011. And are the new ones you have in stock updated ?

 
Reply With Quote
Old 11-18-2012, 01:14 PM   #3
toadspit26
Recipes 
 
Oct 2012
Waterford, MI
Posts: 10
Liked 1 Times on 1 Posts


I'm thinking about upgrading from cheap basic faucets to Perlick design. I read some reviews where folks are complaining about the "new" design not being a sturdy as the "older" Perlick faucets. They also complain they the new ones may not fit standard shanks and have problems leaking. Can you shed any light on these issues?
__________________
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.

 
Reply With Quote
Reply
Thread Tools



Forum Jump