Kegging system questions - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Kegging system questions

Reply
 
Thread Tools
Old 08-22-2012, 10:07 PM   #1
FrizzleFry
Recipes 
 
Oct 2011
Niceville, FL
Posts: 24


I just bought a Brew Logic Dual Tap Draft System with Pinlock kegs from Midwest Supplies. They came slightly pressurized, which I thought was a good sign.

I put some water + oxyclean in one of them, closed the lid and started to shake it. Liquid came out of the lid with each shake despite being closed. So I hooked up a CO2 line to pressurize it hoping that would force it to seal. I had to wiggle the lid around to get it to seal but seems to have eventually.

Is this normal? Or should it seal without pressurizing? Is this an indication of a poor reconditioning?

The other one seems to seal better. Well, the lid anyway. The CO2-in pin valve leaks. I looked closely at it and the o-ring has a little gouge taken out of it. I remember from my paintball days that you change the o-ring when you see that. Apparently they didn't bother to test any of this stuff before shipping it out.



 
Reply With Quote
Old 08-22-2012, 10:20 PM   #2
oakbarn
HBT_LIFETIMESUPPORTER.png
 
oakbarn's Avatar
Recipes 
 
Jun 2011
Argyle, Texas
Posts: 825
Liked 62 Times on 49 Posts


We have 31 kegs. Most of them will not seal unless we put pressure on the. Sometimes it takes a lot of pressure (20+) If we need a lower pressure, we just dump the co2 as once sealed, they normally stay sealed.

You also need to get some food grade lubicant. We use it on the rubber and it helps the seal. also, we have had to readjust the seal to get it to seat. Onething you will notice when you have beer in them is that the beer will absorb the CO2. If you think you have a keg pressurised at 10 psi on top of beer (or water), and come back in a couple days, the CO2 is gone. It did not leak but was absorbed.

I normally soak with oxiclean or sun oxgen ( I like the sun product better) overnight. I have an extra keg that I use for cleaning and shoot oxiclean solution through both side(beer our and Gas In) with a hose set up for just cleaning. We can ladder beers with this many kegs, some for a year.

 
Reply With Quote
Old 08-23-2012, 02:20 AM   #3
grasshopperfirestarter
Recipes 
 
Sep 2010
santa monica, California
Posts: 248
Liked 25 Times on 19 Posts


I bought the ball lock dual kegging kit from them. I have kegged 4 brews so far! liquid will come out if you shake it without sealing lid without hit of co2. Today I checked my keg and all my co2 leaked out overnight even though I tested it yesterday. I re filled tank and hooked it back up, everything seems fine now. kegging is so much better and more fun than bottling but there is still a lot to learn. What do you have on tap?
__________________
"I'd Tap That!"
HaPpY yEaSt HaPpY fEaSt

=BEARDEN BREWERY=

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Buying kegging system, questions eyox16 Bottling/Kegging 4 02-16-2012 08:56 PM
Kegging system Antler Bottling/Kegging 16 05-08-2011 02:12 PM
Which kegging system should I buy? as1084 Bottling/Kegging 8 07-11-2010 05:28 AM
kegging system docmoran Bottling/Kegging 6 12-14-2008 07:17 PM
My Mo$^% @(&*^%$ Kegging system RichBrewer Bottling/Kegging 15 06-12-2006 10:09 PM


Forum Jump