Foaming issue with jockey box - Page 2 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Foaming issue with jockey box

Reply
 
Thread Tools
Old 08-09-2012, 06:28 PM   #11
worksnorth
Recipes 
 
Apr 2011
Soldotna, Alaska
Posts: 685
Liked 64 Times on 50 Posts


If it is the problem, I just gently ran the right sized drill bit through the hole and opened it up, worked perfectly after that.
Cheers

 
Reply With Quote
Old 08-09-2012, 06:40 PM   #12
stack
Recipes 
 
Mar 2009
Greensburg, PA
Posts: 45
Liked 1 Times on 1 Posts


You are referring to the disconnect and not the actual post on the keg, correct?

 
Reply With Quote
Old 08-09-2012, 06:51 PM   #13
worksnorth
Recipes 
 
Apr 2011
Soldotna, Alaska
Posts: 685
Liked 64 Times on 50 Posts


Yes, the black disconnect :-)

 
Reply With Quote
Old 08-10-2012, 11:17 AM   #14
stack
Recipes 
 
Mar 2009
Greensburg, PA
Posts: 45
Liked 1 Times on 1 Posts


Quote:
Originally Posted by worksnorth View Post
Yes, the black disconnect :-)

I checked all three last night and everything was OK. I borrowed a single faucet jockey box from a friend that I may take to the beach instead. Either way I till need to figure out what is wrong with my setup.

 
Reply With Quote
Old 08-10-2012, 03:29 PM   #15
worksnorth
Recipes 
 
Apr 2011
Soldotna, Alaska
Posts: 685
Liked 64 Times on 50 Posts


Ok, sorry that wasn't it, good luck!

 
Reply With Quote
Old 08-15-2012, 08:47 PM   #16
PortlandPatrick
Recipes 
 
May 2010
Portland, Maine
Posts: 124
Liked 7 Times on 6 Posts


Any update on this? Been curious about it, since I'm about to make/buy a jockey box.

 
Reply With Quote
Old 08-15-2012, 08:55 PM   #17
E-Mursed
Recipes 
 
May 2011
Westland, MI
Posts: 881
Liked 112 Times on 65 Posts


I would try running some Star-San trough the lines till it pours out the taps, let it sit for a few hours, and then run beer through the lines again.

Do you have a keg that you can push some Star-San through?
__________________
Schöne Blondine Brauerei
Closed-System Pressurized Fermentation - the future of homebrewing today...!!!

“Simplicity is the ultimate sophistication” – Leonardo da Vinci
"A set back is the opportunity to begin again more intelligently" - Henry Ford

 
Reply With Quote
Old 08-16-2012, 06:54 PM   #18
jblizz
Recipes 
 
Nov 2010
Marmora, New Jersey
Posts: 118
Liked 2 Times on 2 Posts


Quote:
Originally Posted by E-Mursed View Post
I would try running some Star-San trough the lines till it pours out the taps, let it sit for a few hours, and then run beer through the lines again.

Do you have a keg that you can push some Star-San through?
I agree with this make sure it is clean, the other thing is make sure you run some beer through it before adding ice, if you add the ice first and have any water still in it from flushing it can freeze inside the pass and cause foaming... You could also try the epoxy mix sticks that others are using on their kegerators and see if they make a difference...
__________________
Deja Moo: The feeling you've heard this bull before.

My Sites:
http://www.offshorecustomtackle.com/
http://www.inshorecustomtackle.com/

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Jockey Box johnsonbrew Kegerators & Keezers 37 01-24-2014 03:23 AM
Jockey Box LooyvilleLarry Kegerators & Keezers 5 08-13-2012 04:39 PM
beer foaming and spitting tfetter Kegerators & Keezers 6 03-19-2010 11:28 AM
beer foaming and spitting tfetter Kegerators & Keezers 5 03-18-2010 02:36 PM
jockey box Denvel Kegerators & Keezers 9 06-20-2009 05:42 AM


Forum Jump