2 vessel electric system with control panel - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Electric Brewing > 2 vessel electric system with control panel

View Poll Results: What would you pay?
350-450 3 25.00%
450-550 5 41.67%
550-650 1 8.33%
650+ 3 25.00%
Voters: 12. You may not vote on this poll

Reply
 
Thread Tools
Old 08-07-2012, 08:54 PM   #1
CoalCracker
Recipes 
 
Sep 2009
Macungie, Pa
Posts: 1,688
Liked 106 Times on 65 Posts



Within the next month or two I am going to be upgrading my system to 220v and a larger HLT and MT. I'd like to sell the panel and two keggles but am unsure on how much to ask. The keggles are polished and come with all fittings except the 3 piece valves. The mash tun is wire with a thermocouple that I will be keeping as well. This is a HERMS system. Any idea on what to ask? I was thinking around 450.





The HLT has insulation. Both keggles are polished.

The stand and pump aren't included. Just the keggles and panel. It's currently running 110v with two 2000w elements in the HLT. I have boiled up to 12 gallons finished batch in there.
__________________
coalcrackerbrewing.blogspot.com
Vintage Kegerator Build
1 BBL Tippy Dump

 
Reply With Quote
Old 08-08-2012, 12:57 PM   #2
CoalCracker
Recipes 
 
Sep 2009
Macungie, Pa
Posts: 1,688
Liked 106 Times on 65 Posts


Anyone have an idea?
__________________
coalcrackerbrewing.blogspot.com
Vintage Kegerator Build
1 BBL Tippy Dump

 
Reply With Quote
Old 08-08-2012, 01:45 PM   #3
wilceaser
Recipes 
 
May 2009
Southeastern PA
Posts: 228
Liked 5 Times on 5 Posts


If I had the cash it's be gone at $450.00
I'd be up Rt100 so fast the state cops would never know what flew past them.
__________________
Howling Beagle Farmhouse Brewery

Quote:
Originally Posted by SweetSounds View Post
- You can't trigger an SSR with 120 volts - You'll let the smoke out.

 
Reply With Quote
Old 08-08-2012, 02:39 PM   #4
CoalCracker
Recipes 
 
Sep 2009
Macungie, Pa
Posts: 1,688
Liked 106 Times on 65 Posts


lol so you think 450 is a bit on the low side. I don't want to lowball myself as I need as much as I can for my upgrade. Where are you in PA?
__________________
coalcrackerbrewing.blogspot.com
Vintage Kegerator Build
1 BBL Tippy Dump

 
Reply With Quote
Old 08-08-2012, 03:33 PM   #5
CoalCracker
Recipes 
 
Sep 2009
Macungie, Pa
Posts: 1,688
Liked 106 Times on 65 Posts


Added a poll.
__________________
coalcrackerbrewing.blogspot.com
Vintage Kegerator Build
1 BBL Tippy Dump

 
Reply With Quote
Old 08-08-2012, 03:57 PM   #6
abarnett
Recipes 
 
Nov 2011
Jenkintown, PA
Posts: 159
Liked 4 Times on 3 Posts


Having just built a similar panel, I'd ballpark $200 for the panel and $150 for each keggle... so around $500. That's for "used" equipment, and doesn't pay you anything for the time it took to build it all.

And too bad I just finished my panel, or there'd be a drag race up Rt100.

 
Reply With Quote
Old 08-08-2012, 06:58 PM   #7
wilceaser
Recipes 
 
May 2009
Southeastern PA
Posts: 228
Liked 5 Times on 5 Posts


Quote:
Originally Posted by CoalCracker View Post
Where are you in PA?
Near, Oxford PA I grew up in Hazleton.
__________________
Howling Beagle Farmhouse Brewery

Quote:
Originally Posted by SweetSounds View Post
- You can't trigger an SSR with 120 volts - You'll let the smoke out.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
2bbl electric control panel dolemike Electric Brewing 19 06-09-2013 01:10 PM
No Control Panel Electric Build AnOldUR Electric Brewing 4 10-10-2011 06:27 PM
My electric with divorced control panel rod734 Electric Brewing 0 10-06-2011 01:53 PM
Electric brewing without a Control Panel?? staab016 Electric Brewing 42 06-20-2011 07:04 AM
Electric Control Panel PinupBrewery Electric Brewing 8 05-12-2011 12:41 AM


Forum Jump