Crushing small amounts of specialty grains - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Extract Brewing > Crushing small amounts of specialty grains

Reply
 
Thread Tools
Old 07-23-2007, 02:48 AM   #1
BlindLemonLars
HBT_LIFETIMESUPPORTER.png
Recipes 
 
May 2007
Posts: 4,474
Liked 26 Times on 24 Posts



Up to now, I've either bought kits with pre-crushed grains or bought my small amounts of grain at the LHBS and used their mill. In what seems like a logical step forward, I've started buying larger amounts of extract, hops and specialty grains and measuring out my own recipes. Problem is, the bulk grains are not pre-crushed. Well, actually it's not a problem...it's part of the strategy. I figure it's just like coffee, I should crush immediately before use and minimize oxidation. Better, fresher ingredients = better brew. Still, it means I've got an additional step to do.

Can anyone suggest a better way for a humble extract brewer to properly crush a pound or so of specialty grains? I did my research, and today I gave the old rolling pin trick a try. Sadly, it took a lot of time and effort, and gave rather poor results, with some grains clearly not cracked at all. I finished up with a rubber mallet, but there has GOT to be a better way.

An old book I have (Better Beer & How To Brew It) suggests using a blender, but that method seems to be universally rejected by the experts here. (Frankly, that book is FULL of terrible and outdated information. Twenty years ago it was my bible, but it seems comical now.) Anyhow, if anybody has any other suggestions or new ideas, I'd appreciate hearing them.

 
Reply With Quote
Old 07-23-2007, 02:50 AM   #2
homebrewer_99
 
homebrewer_99's Avatar
Recipes 
 
Feb 2005
Atkinson (near the Quad Cities), IL
Posts: 17,792
Liked 132 Times on 99 Posts


For smaller amounts of grain I have used my electric coffee grinder...the kind where you press down on the lid and the blades turn...

The best results (where you don't chop up too much of the husk) is a quick 2 secs.
__________________
HB Bill

 
Reply With Quote
Old 07-23-2007, 02:51 AM   #3
Yuri_Rage
Gritty.
HBT_MODERATOR.png
 
Yuri_Rage's Avatar
Recipes 
 
Jul 2006
Southwest
Posts: 14,289
Liked 808 Times on 512 Posts


The best way to do it is with a purpose built grain mill. Try buying pre-crushed grains.

Otherwise...the blender, a coffee grinder, or a food processor might work in the short term. It's not the best way, but if you're just steeping some specialty grains, it'll work ok.
__________________
Homebrewed Blog..........YouTube Channel .......... Shirts, posters, etc

 
Reply With Quote
Old 07-23-2007, 05:06 AM   #4
BlindLemonLars
HBT_LIFETIMESUPPORTER.png
Recipes 
 
May 2007
Posts: 4,474
Liked 26 Times on 24 Posts


Buying pre-crushed is what I'm trying to get away from. I'd rather have my grain cracked moments before steeping, rather than days, weeks or months.

I'll give the food processor a whirl, no pun intended. Hopefully a few quick pulses will crack most of the grains and not turn it into flour. The worst possible outcome is that I ruin a dollar or two worth of malt.

Thanks guys.

 
Reply With Quote
Old 07-23-2007, 05:36 AM   #5
FlyGuy
 
FlyGuy's Avatar
Recipes 
 
Jan 2007
Calgary, Alberta
Posts: 3,605
Liked 178 Times on 51 Posts


Get yourself a cheap Corona-type mill. I have seem them as cheap as $15 new. They don't produce an ideal crush, but there are a surprising number of all grain brewers here that use them with great success. Undoubtedly they will do a fine job for crushing a bit of specialty grains in your brews.

 
Reply With Quote
Old 07-23-2007, 01:47 PM   #6
Tenchiro
 
Tenchiro's Avatar
Recipes 
 
Jun 2007
Providence, RI
Posts: 2,973
Liked 6 Times on 6 Posts


My LHBS has a coffee grinder like you would see in a supermarket. I dunno if you have one around your area or not.

Maybe try a food processor on a low pulse setting, it has room for lots of grains and should make quick work of them.
__________________


 
Reply With Quote
Old 07-23-2007, 02:43 PM   #7
SixFoFalcon
Recipes 
 
Jul 2007
Flourtown, Pennsylvania
Posts: 499
Liked 8 Times on 7 Posts


Just a tip if you use your regular coffer grinder: Tear up a piece of soft bread and run it through the coffee grinder. It cleans up all the dust and coffee residue quite nicely.
__________________
Primary: Nothing
Secondary: ESB
Kegged:Apfelwein
On tap:Witbier, American Stout, Imperial Stout, Root Beer

Bottled:"Massacreation" Chinook Barleywine, Belgian Golden Strong Ale, English IPA, Cabernet Sauvignon
Next: US IPA

 
Reply With Quote
Old 07-23-2007, 03:20 PM   #8
BlindLemonLars
HBT_LIFETIMESUPPORTER.png
Recipes 
 
May 2007
Posts: 4,474
Liked 26 Times on 24 Posts


I'll give the food processor a shot this weekend. (Sunday has been brewday around these parts for a few months now!) If I'm not happy with the results, I'll look into a cheap corona type mill.

Thanks again.

 
Reply With Quote
Old 07-23-2007, 03:49 PM   #9
jelsas
Recipes 
 
Jan 2007
Pittsburgh, PA
Posts: 103

i'm in the same situation, and considering a Corona mill too. I'd like to hear how the food processor works for 'ya. I'd like to crush enough for a partial mash, so I'm thinking a food processor might not really hold enough.

 
Reply With Quote
Old 07-23-2007, 04:15 PM   #10
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,245
Liked 1695 Times on 1089 Posts


That crush is going to be way off anyway, something bordering on flour. There's no half way on this really unless you buy a cheap corona mill. I've tried rolling pins, rubber mallets, coffee grinders, etc. No use unless you're talking 8 ounces worth.
__________________
Welcome to BrewHardware.com. I love you.
Corny Keg Dry Hop Canisters $26.50 for limited time
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Small amounts of wheat - why? BrewBrain All Grain & Partial Mash Brewing 6 06-05-2008 07:39 PM
Value of steeping specialty grains in small volume? e lo Extract Brewing 7 09-15-2007 03:01 PM
Transporting small amounts from keg? JoeRags Bottling/Kegging 5 11-02-2006 03:37 AM
How do you get small amounts of beer from a Carboy? Evan! Equipment/Sanitation 11 09-20-2006 01:10 AM
crushing specialty grains? StudentBrewer Extract Brewing 9 11-04-2005 02:05 AM


Forum Jump