Regulator Issue - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Regulator Issue

Thread Tools
Old 08-06-2012, 02:04 PM   #1
Feb 2010
Kent/Brockport NY
Posts: 1,071
Liked 147 Times on 103 Posts

Is there anything in a regulator to keep you from dialing to high of a pressure? My regs don't like when I go over 20psi. I don't remember having this problem when I first started kegging. I dial up to about 40psi to seal my corny and I get a very small burst of gas. I took off my quick connect and pressed the button with my finger and same thing. I dial it to 15 and I get a nice steady flow. I swapped my reg to a newer one last time this happened and things seemed to work fine. I went to seal a couple of tanks the other day and the problem happened again. I knew I was almost out of gas so I thought that was the problem. I tried a full tank and I still have the problem. Am I missing something here?

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dual-regulator issue FlyDoctor Bottling/Kegging 4 07-03-2012 02:37 AM
Regulator issue. Need help fast. Gigemags05 Bottling/Kegging 4 05-08-2012 12:59 PM
Regulator Issue Sublime8365 Bottling/Kegging 3 02-03-2012 12:59 AM
Regulator issue? Miamimill13 Bottling/Kegging 2 12-31-2011 02:40 AM
Regulator Issue or just me... Waunabeer Bottling/Kegging 1 01-26-2011 08:23 PM

Forum Jump